When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Matt hooked it up big time and did some carbon fiber work on a some interior pieces for me. Took a little time to get everything sorted and shipped from the US to Poland and back to the US but it was certainly worth it. Stand up guy. Much respect.
2012 C63;1971 280SE 3.5(Sold);2023 EQS 450 SUV 4 Matic (Wife's)
Yes Matt is very good to deal with and a stand up guy. I have all sorts if interior pieces that he did, some especially for me. I also have a FL grill that is beautiful.
2012 C63;1971 280SE 3.5(Sold);2023 EQS 450 SUV 4 Matic (Wife's)
Matt did a gorgeous CF wheel with leather air bag. Stitched my leather cover for the 507 CF shift knob he did for me. Did the front dash piece and the surround for the AC controls.
He did mine too. Great price. Oem weave is smaller. Looks better than piano black cheap plastic one. He has some amazing other weaves with reflective colors in the c.f. Also some hybrid kevlar/c.f. weaves.
The OE carbon has a gold tint to it. Maybe the clear coat or epoxy used, maybe the age, I don’t know.
All depends on the composition of the carbon fabric. Carbon Kevlar tends to have a yellow tint because that’s the natural color of the Kevlar fibers. I’m going to guess that’s why the oem looks that way.
Matt did a gorgeous CF wheel with leather air bag. Stitched my leather cover for the 507 CF shift knob he did for me. Did the front dash piece and the surround for the AC controls.
Mort, I'm assuming that you've sent all the pieces to Poland then, for Matt to do all the work. How did you send out the airbag? Was there a special way to ship that?
Has anyone done any other interior parts that isnt the normal parts people get done? Like the top/bottom trims around the dials? The radio and esp/heating button surrounds?
2012 C63;1971 280SE 3.5(Sold);2023 EQS 450 SUV 4 Matic (Wife's)
Originally Posted by Phil_T
Has anyone done any other interior parts that isnt the normal parts people get done? Like the top/bottom trims around the dials? The radio and esp/heating button surrounds?
Matt did my AC/Heating button surround. See in the pics I posted above. He may have done my shift surround that way as well. I sent him the piece from my car and he did it for me. I am sure he could tell you if he can do them. Sometimes he can source the parts cheap and do them and sometime they are not available and he will get you to send your parts to have them done in CF. Great service!
2012 C63;1971 280SE 3.5(Sold);2023 EQS 450 SUV 4 Matic (Wife's)
Originally Posted by rondeezy
Whoa, all of these pieces are gorgeous!
Mort, I'm assuming that you've sent all the pieces to Poland then, for Matt to do all the work. How did you send out the airbag? Was there a special way to ship that?
Rondeezy, Matt sourced the wheel and air bag cover for me. I did not have to send him anything for the CF wheel and no core deposit. He built it into the price and it was still very reasonable. He just shipped the air bag directly to me, by ground I think, and no special steps where required as it was not going by air.
Matt did my AC/Heating button surround. See in the pics I posted above. He may have done my shift surround that way as well. I sent him the piece from my car and he did it for me. I am sure he could tell you if he can do them. Sometimes he can source the parts cheap and do them and sometime they are not available and he will get you to send your parts to have them done in CF. Great service!
Sorry I meant the surround around the esp/seat heater buttons. I already have the climate control, gear shift and cup holder. I was just wondering if anyone has done the radio and buttons below or around the dials on the facelift model.
Rondeezy, Matt sourced the wheel and air bag cover for me. I did not have to send him anything for the CF wheel and no core deposit. He built it into the price and it was still very reasonable. He just shipped the air bag directly to me, by ground I think, and no special steps where required as it was not going by air.
Ugh, my wallet is gonna cry with all of these ideas floating around on this forum! Thanks for the insight!
Damn, the work looks amazing.
I think I'm going to have to get this done. I have gloss black inserts in the interior of my car. Would love CF.
What does he do here, just wrap a thin layer of CF around your original parts.
11-20-2017, 06:24 PM
