Lowering Options for the CLE53 AMG
#1
Junior Member
Thread Starter
Lowering Options for the CLE53 AMG
Hey guys, I've had my car for a few weeks now and thought i would be able to leave it at the stock height, that's not the case. It sits too high in my opinion and needs a slight drop, nothing aggressive, maybe 10mm around. Does anyone know if there is a lowering module compatible with this yet? I'm not too familiar with MB chassis codes and know that my old GLC43 253 had a lowering module available. Any help would be welcomed
Hers's my car in some unflattering images.
Hers's my car in some unflattering images.
#2
MBWorld Fanatic!
I thought exactly the same thing since I first saw this model and it's most probably engineered that way but 100 % agree that it sits with too large a gap between tyre edge and fenders, especially if you compare it to the new GT coupe.
I don't have one of these but will pull the trigger on the 63 variant if it comes with the V8 and will want to do the same mod.
It's early days so would not expect any solutions available just yet, but in time the usual aftermarket crowd will have lowered height springs released, maybe even complete coil over replacements.
Hopefully they work well in providing a slight drop with no disruption to everything else - always a case of hit & miss with the aftermarket...
I don't have one of these but will pull the trigger on the 63 variant if it comes with the V8 and will want to do the same mod.
It's early days so would not expect any solutions available just yet, but in time the usual aftermarket crowd will have lowered height springs released, maybe even complete coil over replacements.
Hopefully they work well in providing a slight drop with no disruption to everything else - always a case of hit & miss with the aftermarket...
#3
Out Of Control!!
Join Date: Dec 2019
Location: Yours to Discover
Posts: 13,453
Received 2,530 Likes
on
2,152 Posts
PFL205.064 with M276.823 (Oil pump solenoid defeated)
Hey guys, I've had my car for a few weeks now and thought i would be able to leave it at the stock height, that's not the case. It sits too high in my opinion and needs a slight drop, nothing aggressive, maybe 10mm around. Does anyone know if there is a lowering module compatible with this yet? I'm not too familiar with MB chassis codes and know that my old GLC43 253 had a lowering module available. Any help would be welcomed
Hers's my car in some unflattering images.
https://cimg1.ibsrv.net/gimg/www.mbw...bb08c58935.jpg
https://cimg2.ibsrv.net/gimg/www.mbw...0c5005a6ef.jpg
https://cimg3.ibsrv.net/gimg/www.mbw...36ce56ee4e.jpg
Hers's my car in some unflattering images.
https://cimg1.ibsrv.net/gimg/www.mbw...bb08c58935.jpg
https://cimg2.ibsrv.net/gimg/www.mbw...0c5005a6ef.jpg
https://cimg3.ibsrv.net/gimg/www.mbw...36ce56ee4e.jpg
#5
Out Of Control!!
Join Date: Dec 2019
Location: Yours to Discover
Posts: 13,453
Received 2,530 Likes
on
2,152 Posts
PFL205.064 with M276.823 (Oil pump solenoid defeated)