Fuel injector fiber washer
https://cimg3.ibsrv.net/gimg/www.mbw...a39f3e8850.jpg
https://cimg5.ibsrv.net/gimg/www.mbw...2440a428fb.jpg So I started the so called dreaded 82mm throttle body replacement on my sl55 Friday and everything has gone very well up to this point as I still have everything apart because I figured it's a good time to do other things like valve cover gaskets, s/c oil,etc but when I pulled my fuel rack and got ready to change the o-rings out I noticed that these little fiber washers on the injectors were broke any suggestions could not find any washers by themselves or do I just by new injectors |
they sell injector kits with the orings and whatever is needed
|
okbarnett could you be more specific as to where I can find the kit Thanks
|
Originally Posted by Woodpecker1
(Post 7379915)
okbarnett could you be more specific as to where I can find the kit Thanks
im not certain on the sl55 injector type, can you take a picture of the part number? they appear to be "ev6" style with the jetronic connector (larger and rectangular). for example go to eBay and search "Bosch injector rebuild kit" and you will find hundreds, with the orings, washers, pintle caps where applicable, filters, etc. Purchase a quality kit for your injector type. |
dealer should have them in stock
|
https://cimg9.ibsrv.net/gimg/www.mbw...223874bf6b.jpg
drocksl55 here is the pic you requested and thanks everybody for the help I will keep searching some more tonight |
you might look up bosch injectors on web and find a dealer that sells those and parts for them. I know on porsche 928 , 944 the injectors look the same and kist are available from different sellers
|
Originally Posted by Woodpecker1
(Post 7380302)
https://cimg9.ibsrv.net/gimg/www.mbw...223874bf6b.jpg
drocksl55 here is the pic you requested and thanks everybody for the help I will keep searching some more tonight Search for "Bosch ev6 kit" online and you will find hundreds of options. They look to be around $15-20 on eBay with everything you need. |
Yep I already got them on order through ebay thanks again for your help
|
chean the injector all over with a carb cleaner, assemble the orings with wd40 and they will easily insert into the body. if you have access to a injector tester, you can fire them and check the pattern. but if the car was running good before they are probably fine
|
All times are GMT -4. The time now is 09:10 PM. |
© 2024 MH Sub I, LLC dba Internet Brands