Supercharger is not working at all..

Reply Subscribe

Thread Tools

Search this Thread

Rate Thread

Jul 14, 2016 | 10:22 PM

SRT6EXY

Thread Starter

Newbie

Joined: Apr 2014

Posts: 8

Likes: 0

SRT6 Chrysler Crossfire

Supercharger is not working at all..

Hey everyone, I'm currently having a huge issue with my car. I've been in contact with Needswings and many other members(all have been great for the help and we are still working on it) But, i'm wanting to address this issue as well on the fourms for the time being since the issue is still happening. The SC would randomly cut in and out starting 5 weeks ago and as of 2 weeks ago the SC would not engage at all, even at cold startup. Last night and today same issue, no boost at all is being made. I tried the IC pump on at all time mod along with burping the IC system and had no bubbles in the system. Today I went to floor the car and the BAS ESP light came on and then turned off along with a lumpy idle for a few moments. Afterwards, i filled car with new gas, did a throttle reset, and even disconnected and reconnected the SC clutch sensor. I'm throwing p0135, p0155, p0410, p0412 codes. I've recently installed new 02 sensors but the codes are still there.. any thoughts?
Thanks,
Mark

Jul 25, 2016 | 04:53 PM

latemodel21

MBWorld Fanatic!

Joined: May 2009

Posts: 1,187

Likes: 239

From: Santa Clara, Ca

2003 SL55 / 2002 SLK32

Quote:

Originally Posted by SRT6EXY

Have you verified that the SC clutch is getting any power ? (S/B better than 12volts ANY time motor is running) . I only ask because the fuse that supplies power to the clutch also supplies power to the o2 sensor heaters and the secondary air switchover valve (which are ALL related to the codes you listed). The fuse is F2 on the K40 module.

hope that helps,
Chris