SICAMG

A while back someone showed a billet fuel pump cover that eliminated the burned connector problem.
Can't seem to find it for sale anywhere as I am swapping out my pumps for Aeromotive's and replacing the driver side assembly do to a small leak.

Thank's

Notdke9fdkfjekrjrkj123

https://mbworld.org/forums/w219/685476-billet-fuel-tank-lid-drop-pumps.html

Das_it16

I have one. Shoot me a pm.

DavesMeanE's

I make them What would you like to know?

Thanks!

Dave

SICAMG

OK I have seen two versions of this. One has the outlet AN fittings and the other is really a stock replacement cover with a much better fuel pump connector. Do you make both?

DavesMeanE's

Never seen the 2nd one you are referring to. Mine does have a much improved wiring solution, with 12ga ethanol safe wiring. Plenty of capacity for pretty much any fuel pump you want to run. It also has a factory connector in integrate to the stock wiring harness.

Thanks

Dave

SICAMG

SICAMG

Not yours?

DavesMeanE's

That one's not mine

Thanks!

Dave

Notdke9fdkfjekrjrkj123

https://mbworld.org/forums/w211-amg/584658-my-fuel-tank-recall-alternative.html

Notdke9fdkfjekrjrkj123

If you only need better wiring:

https://vrpspeed.com/index.php?route=product/product&path=60_100&product_id=429

SICAMG

Thanks for the info. I contacted Rockthemullet since he made them.
Wiring is not really the problem as I run a low pressure system so no melting. Just looking for a better top that will never go bad in the future ....but a better connector is a big plus.

DavesMeanE's