Why can't someone make one of these for?
#1
Why can't someone make one of these for?
Our amg's? Nice, simple and clean. http://store.blackforestindustries.c...ccacroils.html
#4
MBWorld Fanatic!
Joined: Sep 2008
Posts: 3,152
Likes: 0
From: murfreesboro,tn
2003 porsche 996 turbo
needswings makes a nice kit for the m112 s/c engine. about 110$ im sure they could do it for yours if they had a car to look at. located in warren michigan
http://needswings.com/NeedsWings-SLK...Kit-slkcc.aspx
http://needswings.com/NeedsWings-SLK...Kit-slkcc.aspx
Last edited by 320 dreamer; 06-05-2012 at 09:41 PM.
#5
just buy 2 of these and hook one up on each side,this way you wont even have to get under the tb.
http://www.ebay.com/itm/BLUE-750ML-C...0c6d26&vxp=mtr
http://www.ebay.com/itm/BLUE-750ML-C...0c6d26&vxp=mtr
#6
You don't need 2 catch cans. You only need to hook up the 5/8" nipple on the drivers side valve cover. The other 2 small nipples on the secondary/ upper valve covers are for vacuum only. Little to no oil ever makes it up through the baffles in to those small valve covers. I can't believe that newb company made a catch can for 3 inputs lol.
#7
You don't need 2 catch cans. You only need to hook up the 5/8" nipple on the drivers side valve cover. The other 2 small nipples on the secondary/ upper valve covers are for vacuum only. Little to no oil ever makes it up through the baffles in to those small valve covers. I can't believe that newb company made a catch can for 3 inputs lol.
Trending Topics
#11
that wouldn't make sense because where would the oil come from when the breather covers leak, which these cars are notorious for.
#15
Weistec has one for the 63 engine: http://www.weistec.com/m156os.html
#17
I think the 5/8" line main purpose is too allow air to be drawn into the valve cover to offset the effect of vacumn from the PVC process? They are normally connected to the intake to capture the oil vapor escaping back out the hose during low rpm.
#19