Put HRE's on my E55 :)
 

Sorry for the pic whoring I am just bored at work. Spec on the wheels/tires

HRE 447R 3-piece wheels. The front two wheels are all 19" x 8.5" (with a +29 offset), while the rear wheels are 19" x 9.5" (with a +38 offset).
Finish - Face: Brushed aluminum
Finish - Lips: Polished aluminum
Bolt Pattern: 5x112
The tires are Dunlop SP Sport 9000's. The front tires are 235/35ZR19 tires, while the back tires are 265/30ZR19 tires.

I bought them on ebay for a deal I could not say no too, did't need them but just couldn't pass them up. I had ebay E63 wheels on it before, the other car is my roomates 02 GS300 slammed to the ground on coilovers.

BEFORE

http://i644.photobucket.com/albums/u...S/IMG_5914.jpg
http://i644.photobucket.com/albums/u...S/IMG_5915.jpg
http://i644.photobucket.com/albums/u...S/IMG_5920.jpg

AFTER :)

http://i644.photobucket.com/albums/u...S/IMG_5922.jpg
http://i644.photobucket.com/albums/u...S/IMG_5923.jpg
http://i644.photobucket.com/albums/u...S/IMG_5924.jpg
http://i644.photobucket.com/albums/u...S/IMG_5929.jpg
http://i644.photobucket.com/albums/u...S/IMG_5931.jpg
http://i644.photobucket.com/albums/u...S/IMG_5943.jpg
http://i644.photobucket.com/albums/u...S/IMG_5945.jpg
http://i644.photobucket.com/albums/u...S/IMG_5944.jpg
http://i644.photobucket.com/albums/u...S/IMG_5964.jpg
http://i644.photobucket.com/albums/u...S/IMG_5956.jpg
http://i644.photobucket.com/albums/u...S/IMG_5954.jpg
http://i644.photobucket.com/albums/u...S/IMG_5953.jpg
GS ON STANCE SCFIVE 19"

I NEED to lower this thing from 4x4 mode asap. Just stuck on which module to go with and what options I want to have with it. I am going to look at one that Ahmed recommended through MBH and take it from there. YES I KNOW IT NEEDS TO BE LOWERED hahahahaha

Thing looks lifted loll

yea yea yea lol. I am thinking about doing a CF wrap on my roof. Did you do yours by yourself? How much of a PIA? Thanks

Do it.. I get lots of compliments on it.. No I actually had someone do it for me, as I wanted it to come out perfect. Definitely would be easier with two people and a heat gun.

Heres a pic
http://i1130.photobucket.com/albums/...1/abd2e56b.jpg

Old school HRE's. Looks good! :y

I know/hope you'll be lowerin the car soon so I won't hit you on that ;) :D

That looks good. And go ahead and wrar the roof. I'm doing mine also. Should look great.

Good looking wheels, really can't go wrong with HRE's :y

Might have to stop by and look at it one day

your doing the laundau roof like AKnight55 ? Will u get a brougham emblem to complete the look?
http://www.eautotrim.com/images/diff/topssample.jpg

looks good! :y

how good of a deal did you get? - just do the Star Lowering - most shops will only charge you one hour of labor -

the look good even if 4X4 mode

Looks good.

Aaron

That looks way naughty! I am a big fan...
1+ for CFW on roof

Looks great a slight drop would be sexier!!

thanks for all the compliments guys! Just text me Steve, I still have your air boxes I need to get back to you.

Those HREs are fantastic! Great choice.

Looks good! Now all you need is the Programa lowering module lol

http://www.ebay.com/itm/ProgRama-Mer...f1c3bb&vxp=mtr

Oh ya this one time I did

Congratulations!

Very Nice choice on the wheels.

Looks good...wanna get rid of those old rims??

Hell yea and $950 is not bad at all. Have you used this unit before? I just want something I can have set to certain heights at certain speeds. Anything over 30-35 mph I would want to be at factory height, mainly because NOVA roads blow.

I will think about it but they will probably go on in late October/early November just because I do not want to have to worry about the salt and crap that goes down during the winter season in my area. And if I have to drive in the snow I would cry if I curbed one of these wheels because they no longer make this model...... lol

:y

Rims look nice. Changed my Hre last weekend to stockers. I rather change them know then later

It does have a speed option but when when you try to click on it it doesn;t let you.. i guess that option is not for our cars not for our cars, that would be amazing though. I hear you, driving around at higher speeds with the inner barrels holding most of the weight can lead to bent wheels quick.