ssigarto

Anyone with an E63 successfully installed one of these? I tried and the curvature at the corners were way too far away from the bumper requiring a lot of force to get them to conform to the E63 bumper. I had over 1/2 inch gap on both sides.

Redw20855amg

I did too, you have to use the screws to reform the bumper to the diffuser. If you try to form the diffuser to the bumper it will never work

berti_00

My rear bumper is 63 as well and I have a slight gap too

ssigarto

I ended up returning the rear diffuser and ordered the EuroTec one from Tal. Hopefully that will be a much better fit. The front splitter from Gary was perfect but the rear was not close enough for me.

aeroman

Hit it with a heat gun and it will bend in and use screws to keep it there.