![]() |
Let's Hear IT!!!
Still trying to make a decision on who to get dyno tuned by... :nix:
So let's hear it!! who has the most 10sec 55s under their belt :naughty: Eurocharged--BIP--TTM--OE If I'm forgetting some tuners please feel free to add to the list.. |
TTM uses EC mostly
|
Originally Posted by 03svtkiller
(Post 6450054)
Still trying to make a decision on who to get dyno tuned by... :nix:
So let's hear it!! who has the most 10sec 55s under their belt :naughty: Eurocharged--BIP--TTM--OE If I'm forgetting some tuners please feel free to add to the list.. |
Does EC tune for :nx:
|
Originally Posted by RedBullJnky
(Post 6450063)
I used EC when I ran 10.7 and got the 1.49 60ft.
|
Yes Jerry tunes for go juice
|
Originally Posted by Hulk
(Post 6450074)
Yes Jerry tunes for go juice
|
That could work but you can use a higher octane too
|
Kleemann 10.77@130 03 SL55
|
Originally Posted by 03svtkiller
(Post 6450072)
What mods did you have at that time?
Carbon fiber intake tubes and air box 550cc injectors with NO looped rail Trunk tank Water/meth 50/50 mix dual nozzles after the iat sensor ( cooling only, no tune) Lsd 185 pulley EC longtubes 82 tb Q16 race fuel Stock front seats removed and driver seat replaced with a carbon race seat with 5 point harness and welded frame and bars ( not a full roll cage, just the driver seat) EC dyno tune and TCU tune ANNDDDD, a long azz drive to MIR |
Originally Posted by RedBullJnky
(Post 6450093)
EC stage 3
Carbon fiber intake tubes and air box 550cc injectors with NO looped rail Trunk tank Water/meth 50/50 mix dual nozzles after the iat sensor ( cooling only, no tune) Lsd 185 pulley EC longtubes 82 tb Q16 race fuel Stock front seats removed and driver seat replaced with a carbon race seat with 5 point harness and welded frame and bars ( not a full roll cage, just the driver seat) EC dyno tune and TCU tune ANNDDDD, a long azz drive to MIR And looks like the same list as mine except I have the 90mm TB and Kleeman headers and no lsd. |
Originally Posted by Hulk
(Post 6450090)
That could work but you can use a higher octane too
|
Never used nos on this car so I don't know
You can ask e55amgrocket and 305-E55 since they have more experience with that or you can ask jerry too since he tuned both |
Originally Posted by 03svtkiller
(Post 6450156)
Would you happen to know what size nozzles you ran?
And looks like the same list as mine except I have the 90mm TB and Kleeman headers and no lsd. |
RedBull what was your trap speed?
|
Originally Posted by kponti
(Post 6450325)
RedBull what was your trap speed?
After that I ran 129mph but later in the day. |
BIP
|
OE has a couple of cars in the 10 as well. They do a lot of nitrous tuning on the M113K and M156.
|
Originally Posted by johnnyblaze
(Post 6453489)
OE has a couple of cars in the 10 as well. They do a lot of nitrous tuning on the M113K and M156.
|
Originally Posted by johnnyblaze
(Post 6453489)
OE has a couple of cars in the 10 as well. They do a lot of nitrous tuning on the M113K and M156.
|
^^^ Go for it bro
|
all major tuners are good it just boils down to whom you can communicate with the best
|
How is TTM on this list? That reputation was destroyed very publicly in a $20k fire.
|
Can't negate the fact that he had more 10 sec cars than anyone
|
Which is even more bizarre that he would torch his rep over $20k. I'd think that by this point, that decision has cost him at least $20k. Sending TTM money now would be like letting Josh Duggar babysit your kids.
|
| All times are GMT -4. The time now is 10:33 PM. |
© 2026 MH Sub I, LLC dba Internet Brands