I'm from the Philippines yes I read it also but x4/10 is the main fuse from batterry to the ecu so if the car can be started I don't think it's the problem as in my case when we opened it the continuity is OK. so if your battery and alternator us charging but u still get error message battery visit workshop and interior electrical issues and engine electrical issues I think u should look into doing das on n93 central gateway module.
|
x4/10 is also the connection of the alternator to the battery and you have said that both batteries are charging since their voltages are 13.5v. so if the car us charging but it still gets error message it's probably not the culprit but since as I have said it is the easiest to check we better check this 2 items first x4/10 and bcm.
|
the next 2 items to be checked based on my reading of previous posts from forum are the cgm and eis. in your case the why do you have overheating meaning rad fan is not functioning when the default of Benz it should be on high speed fan to prevent overheating. because of multiple faults involving 2 different location and control units. this points to a common communication pathway which are the eis and cgm. benz is designed with several small computers link by a common router.
|
And how do you get the carpet up to look for this fuse box? Is that two bolt holes i see on either side?
|
Originally Posted by harjothundal
(Post 6879291)
If both of your batteries are holding the correct charge at the time of startup, and your alternator IS outputting enough voltage to charge when running, then I would point all fingers at the BCM, aka Battery Control Module.
|
do you mean that the red battery warning comes on and off on the instrument cluster
|
Originally Posted by DocWilly
(Post 6904537)
do you mean that the red battery warning comes on and off on the instrument cluster
|
the problem in benz the main diagnosis does no manifest right away and based on my personal experience you have 2 choices one is to get the diagnosis using das and analyze its result and second drive it for 2 hrs and wait for all other errors to appear then have it read by das
|
Originally Posted by DocWilly
(Post 6907548)
the problem in benz the main diagnosis does no manifest right away and based on my personal experience you have 2 choices one is to get the diagnosis using das and analyze its result and second drive it for 2 hrs and wait for all other errors to appear then have it read by das
|
probably it resets itself just continue observing and good luck until the next error appears
|
Originally Posted by DocWilly
(Post 6908650)
probably it resets itself just continue observing and good luck until the next error appears
|
Im a little confused considering my W211 E55 doesnt look like that X4/10 fuse box? These are pics of what I actually have, nothing like what was posted. Mine has a ground wire (black) and the above has a red and the boxes are even alike.
https://cimg3.ibsrv.net/gimg/www.mbw...b0bd9d8dc4.jpg https://cimg5.ibsrv.net/gimg/www.mbw...c91b085699.jpg |
All times are GMT -4. The time now is 07:56 AM. |
© 2024 MH Sub I, LLC dba Internet Brands