Saurabh914

I swapped my cluster out for a used one from a 09 e63 to my 07 e63 wagon. Was able to have everything work but mileage shows dashes “———“ I made sure to get a lower mileage dash so that I can raise the mileage to my current odometer. What are the steps in STARS to add/change mileage? Or is this a dealership only option?
Don’t mind the refill warning.

rnd_ash

you've misread what "lower milage" means

The new IC can only have less than 1000 km on it to be paired with a new car. In order to pair this one, you'll need to virginise the EEPROM of the cluster, and this cannot be done with DAS, or the dealer. To do this, you must deaolder the EEPROM chip, modify it's contents to virginise it, then reinstall it, and then with DAS you can pair up the now virgin cluster to your car

​​​​​​When I did this however, I simply swapped the original clusters motherboard to the e63 cluster, and then ,(again via EEPROM editing), modified the interpolation tables for the Speedo and tachometer. This was easier than trying to figure out how to virginise the cluster.

MBENZTECH

@Saurabh914 What tools do you have available?? J2534, C4, C6?? I can try to 0 the miles remotely for you at no charge.

Saurabh914

My friend has Stars, I’m not sure which one he has. But by 0 out the miles would you be able to put back my actual miles.

MBENZTECH

@Saurabh914 On those older clusters once you 0 the miles, you can use DAS and pair it with the EIS.