14 e63s---Any special mix for the intercooler fluid
Thread Starter
Super Member
Joined: Nov 2010
Posts: 746
Likes: 48
From: Queens,NYC
2014 E63s 1993 mazda rx7 on Boost
14 e63s---Any special mix for the intercooler fluid
adding water wetter maybe.... flushing the system.
27k taking it in for glance over...anything special I should ask them to look at?
I have the rusted backing plate and now that I have beaten on it a bit I do not hear the rattle on startup anymore.
Brake fluid flush maybe...
27k taking it in for glance over...anything special I should ask them to look at?
I have the rusted backing plate and now that I have beaten on it a bit I do not hear the rattle on startup anymore.
Brake fluid flush maybe...
Member
Joined: Jan 2014
Posts: 202
Likes: 3
From: Toronto
1994 E500, 2012 e63
I have the rusted backing plate and now that I have beaten on it a bit I do not hear the rattle on startup anymore.
can you elaborate on this backing plate? I get that stupid rattle occasionally.
can you elaborate on this backing plate? I get that stupid rattle occasionally.
Thread Starter
Super Member
Joined: Nov 2010
Posts: 746
Likes: 48
From: Queens,NYC
2014 E63s 1993 mazda rx7 on Boost
Hmm..
It is more engine noise like lifter ticking for a few seconds and then gone.
I have it at the dealer to look over the noise and the backing plate.
Hoping for new backing plate that are rust free. If not I will remove and powercoat in red to match the calipers.
You might have an exhaust rattle.
I have it at the dealer to look over the noise and the backing plate.
Hoping for new backing plate that are rust free. If not I will remove and powercoat in red to match the calipers.
You might have an exhaust rattle.
Member
Joined: Jan 2014
Posts: 202
Likes: 3
From: Toronto
1994 E500, 2012 e63
It is more engine noise like lifter ticking for a few seconds and then gone.
I have it at the dealer to look over the noise and the backing plate.
Hoping for new backing plate that are rust free. If not I will remove and powercoat in red to match the calipers.
You might have an exhaust rattle.
I have it at the dealer to look over the noise and the backing plate.
Hoping for new backing plate that are rust free. If not I will remove and powercoat in red to match the calipers.
You might have an exhaust rattle.
Thread Starter
Super Member
Joined: Nov 2010
Posts: 746
Likes: 48
From: Queens,NYC
2014 E63s 1993 mazda rx7 on Boost
Toronto...
Where in about, I visit 3-4 times a year.
I stay at Duffrin and Steels area Vaughan but I am all over the city when I visit.
I plan of going to EC shop when I visit since they are only a few minutes away.
I stay at Duffrin and Steels area Vaughan but I am all over the city when I visit.
I plan of going to EC shop when I visit since they are only a few minutes away.
Trending Topics
MB World Stories
The Best of Mercedes & AMG
6 Mercedes Models That Did NOT Age Well (But Are Somehow Still Cool)
Verdad Gallardo
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Mercedes 300D Has Pushed Well Past 1 Million Miles and It Ain't Stopping
Verdad Gallardo
Thread Starter
Super Member
Joined: Nov 2010
Posts: 746
Likes: 48
From: Queens,NYC
2014 E63s 1993 mazda rx7 on Boost
every visit I do it..
It does not matter what I am driving from Jane to Duffrin 5Km.
My old 63 hit and this one I hit the same number ( It was all me) but the TT did it much faster..my 211 63 made 487 HP 486 TQ..I have header 3" pipes intake trans and motor tune and 20s...love the 63NA motor the way it sound....
I am going to keep my TT stock until I am able to drive a stock TT with just a tune to feel the difference.. then I will decided to tune or not....
This weekend I am going to try that wheel detail post AG6 posted...
My old 63 hit and this one I hit the same number ( It was all me) but the TT did it much faster..my 211 63 made 487 HP 486 TQ..I have header 3" pipes intake trans and motor tune and 20s...love the 63NA motor the way it sound....
I am going to keep my TT stock until I am able to drive a stock TT with just a tune to feel the difference.. then I will decided to tune or not....
This weekend I am going to try that wheel detail post AG6 posted...
