Camber bolts
#1
Super Member
Thread Starter
Camber bolts
Hey guys,
Wondering if anyone knows if this is the correct part number for the camber (aka crash) bolts for our cars: 212-333-00-71-64? If so, is it just two on the lower control arms or can we get four and do uppers too?
Wondering if anyone knows if this is the correct part number for the camber (aka crash) bolts for our cars: 212-333-00-71-64? If so, is it just two on the lower control arms or can we get four and do uppers too?
#2
Senior Member
I will have to check the parts when i get home, but from what i rememver only cars only have front toe and rear toe that is adjustable.
#4
PLATINUM SPONSOR
For the rear, I run aftermarket arms and also this allowed me to lower and level the rear. The W212 sits up like a 4x4 stock in the rear.
http://ultimatepd.com/amg-w211-e55-t...on-set-70.html
http://ultimatepd.com/amg-w211-e55-t...on-set-70.html
__________________
E63 Biturbo, UPD Cold Air induction kit, UPD performance crank pulley and UPD adjustable rear suspension with ride height adjustment.
CL55 UPD Cold Air Boost kit, UPD 3000 stall converter, UPD 77mm SC clutched pulley and beltwrap kit, Custom long tubes, UPD crank pulley , UPD suspension kit, UPD SC pulley, Aux. HE, Trunk tank w/rule 2000 pump, Mezeire pump, UPD 5pc idler set, Aluminum rotor hats.
www.ultimatepd.com
instagram @ultimate_pd
facebook.com/ultimatepd
E63 Biturbo, UPD Cold Air induction kit, UPD performance crank pulley and UPD adjustable rear suspension with ride height adjustment.
CL55 UPD Cold Air Boost kit, UPD 3000 stall converter, UPD 77mm SC clutched pulley and beltwrap kit, Custom long tubes, UPD crank pulley , UPD suspension kit, UPD SC pulley, Aux. HE, Trunk tank w/rule 2000 pump, Mezeire pump, UPD 5pc idler set, Aluminum rotor hats.
www.ultimatepd.com
instagram @ultimate_pd
facebook.com/ultimatepd
#5
Super Member
Thread Starter
I do agree with you to an extent.
Now, are these all 4 corners? Top two are front lower control arms and the bottom two are the rear lower control arms? I assume the moving plates are to adjust the rear link height to trick the car to lower? Do these reuse the factory hardware?
Now, are these all 4 corners? Top two are front lower control arms and the bottom two are the rear lower control arms? I assume the moving plates are to adjust the rear link height to trick the car to lower? Do these reuse the factory hardware?