When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2018 E63, 2008 SLR DH, 2011 599 SA, 1995 F50, 2007 through 2011 GT3 RS
Originally Posted by BC-2
I agree, high gloss scratches very easily. That’s one reason I went with carbon is because it’s one of the few gloss options that hides any scratches because of the weave pattern. But mainly because of the appearance. I can’t buy an AMG vehicle without carbon somewhere.
Finally got her back from the dealer and put her straight to work at the job sites
Finally got her back from the dealer and put her straight to work at the job sites
Looks good even when dirty!
I know you are looking to order another and perhaps move on from this car, but just curious what needed to be fixed this time? Also, I hope this car doesn't give you anymore issues, you've had enough of them with this one.
2018 E63, 2008 SLR DH, 2011 599 SA, 1995 F50, 2007 through 2011 GT3 RS
Well its a long list but mainly:
- Replace ESP control module
- Replace Hydraulic unit for ESP
- Bleed brakes
- They also found an error in the flexray system wiring and had to repair..
2018 E63, 2008 SLR DH, 2011 599 SA, 1995 F50, 2007 through 2011 GT3 RS
Originally Posted by Quickburn7
Well its a long list but mainly:
- Replace ESP control module
- Replace Hydraulic unit for ESP
- Bleed brakes
- They also found an error in the flexray system wiring and had to repair..
I finally figured it out... my car is not water resistant!
I had that come up a few times too. No solution offered by my dealer
I have seen it once, I just turned the car off and let it cycle thru and it never came back. But its still concerning as to why this would randomly occur.
Wow, you have not had the best luck with your car! Hope you get a replacement. BTW, I see you're running your tire pressures a bit lower than recommended. Is that to reduce road noise or soften the ride?
Sometimes these errors are timing related. When certain modules are suppose to report out on the bus, if a response is not generated (or late) then the system could flag the error. Complex machinery to say the least. Hence, the software updates... correct issues as they become more apparent.
2018 E63, 2008 SLR DH, 2011 599 SA, 1995 F50, 2007 through 2011 GT3 RS
Originally Posted by BC-2
Wow, you have not had the best luck with your car! Hope you get a replacement. BTW, I see you're running your tire pressures a bit lower than recommended. Is that to reduce road noise or soften the ride?
I'm going to play with the tire pressure and try lowering mine too. I'm okay with the ride quality but I'm hoping to reduce some of the tire road noise. It's a bit louder than I was expecting.
That is almost exactly what my tires were set to when I picked up the car from the Mercedes factory in Sindelfingen.
Figured they know what they're doing . . .
We were pleasantly surprised with the ride quality given some comments on the forum and in the press. Maybe it was the German roads, but we did not find the ride harsh.
Mine was set to 44 psi front and about 40 rear at time of delivery. I thought the ride was a little firm but not abusive. My disappointment was having a lot of tire road noise so I lowered the tire pressure to 39 psi front and 36 rear. This helped but it still seems a bit noisy (I even have the Acoustic comfort package). I'll try 36 front and 33 rear. BTW, this is for daily driving. I think 44 front and 40 rear would be good for track or aggressive driving.
Mine was set to 44 psi front and about 40 rear at time of delivery. I thought the ride was a little firm but not abusive. My disappointment was having a lot of tire road noise so I lowered the tire pressure to 39 psi front and 36 rear. This helped but it still seems a bit noisy (I even have the Acoustic comfort package). I'll try 36 front and 33 rear. BTW, this is for daily driving. I think 44 front and 40 rear would be good for track or aggressive driving.
Not sure I would go that low. You need a certain amount of pressure (I believe 40+ psi) to maintain the load rating of the tire.
Not sure I would go that low. You need a certain amount of pressure (I believe 40+ psi) to maintain the load rating of the tire.
All I know is that the Mercedes factory delivered the car with them set in the 38/34 PSI range and on cold mornings they were down as low as 32. The car seemed fine for normal in town and highway driving.
Guys use the directions on the inside of the gas cap--- light laden and speeds under 155 is 41/33 so I cut the front just a bit more cause I want to and think 39/33 is about right.
2018 E63, 2008 SLR DH, 2011 599 SA, 1995 F50, 2007 through 2011 GT3 RS
Originally Posted by Vic55
Guys use the directions on the inside of the gas cap--- light laden and speeds under 155 is 41/33 so I cut the front just a bit more cause I want to and think 39/33 is about right.
My OP of course.
Despite the issues it still is a mean looking and sexy car especially all blacked out and lowered for that aggressive stance!
Just got back in town from a work trip and look what arrived today. Love the color of this car and need to black out the grille, tint the windows and XPEL the car. The car looks so good and drives awesome. These are not the best pictures but it’s a start.
01-08-2018, 04:52 PM
