ADV.1 Pshop renders on 12 CLS63.
ADV.1 Pshop renders on 12 CLS63.
12-19-2011, 05:36 PM
#3
Administrator
Join Date: Nov 2001
Location: THE Orange County, California
Posts: 11,921
Received 795 Likes
on
495 Posts
2020 Audi R8 V10, 2016 AMG GTS, 2018 E63S Edition 1, 2018 Porsche GTS Cab, 2012 C63 BS
Great looking wheel but what are the weights on those?? .. I like form and function. You will feel it in the acceleration- I know ADV wheels are more on the heavy side.
12-19-2011, 05:43 PM
#4
MBWorld Fanatic!
12-19-2011, 05:44 PM
#5
Senior Member
Thread Starter
Depends on how they are spec'd. One piece forged or 3 piece track specs aren't very heavy. My GT2 rims were ~2lbs lighter than the OEM each, didn't weigh the R8 wheels yet though.
12-19-2011, 08:26 PM
#7
Super Moderator
I like the mesh ones... 
BUT...
+1 on what Vic said. Would like to know the weights on them. If they are light,. If not, 
BUT...
+1 on what Vic said. Would like to know the weights on them. If they are light,
. If not,
Last edited by BenzoBoi; 12-19-2011 at 08:29 PM.
Trending Topics
12-19-2011, 08:35 PM
#8
Senior Member
Thread Starter
Yep, def not gonna put anything on there that at the very least isn't the same as stock, if not a lb lighter. Waiting on hearing back about the estimated wheel weights.
12-19-2011, 08:53 PM
#10
Administrator
Join Date: Nov 2001
Location: THE Orange County, California
Posts: 11,921
Received 795 Likes
on
495 Posts
2020 Audi R8 V10, 2016 AMG GTS, 2018 E63S Edition 1, 2018 Porsche GTS Cab, 2012 C63 BS
The more concave the heavier--- the three piecers will come in heavy if compared to the GTR set up. Our stock wheels and tires weigh about 60lbs for the rear and 55lbs in the front.
12-20-2011, 07:51 AM
#12
MBWorld God!
Join Date: Jul 2010
Location: 39.515509, -111.549668
Posts: 30,572
Received 3,353 Likes
on
2,807 Posts
2012 CLS63
they're okay, only thing about ADV.1 is if you don't want 20's; they don't wanna deal with you......LOL........
12-20-2011, 09:04 AM
#13
Senior Member
Thread Starter
12-20-2011, 05:20 PM
#16
Senior Member
Thread Starter
ADVs are looking to be in the 28-30lb range, so I'm probably gonna ditch the concave thing and go w/ the tried and true HRE P40S. 
Waiting on some renders in different finishes...
Waiting on some renders in different finishes...
12-20-2011, 05:50 PM
#17
MBWorld Fanatic!
12-20-2011, 06:43 PM
#18
Administrator
Join Date: Nov 2001
Location: THE Orange County, California
Posts: 11,921
Received 795 Likes
on
495 Posts
2020 Audi R8 V10, 2016 AMG GTS, 2018 E63S Edition 1, 2018 Porsche GTS Cab, 2012 C63 BS
Clap Clap....
I have the P43S's and with the following set up:
20x9 with 255x30 tires
20x11 with 305x25 tires
With this setup I saved about 6 lbs per corner in unsprung weight which is huge since I increased the rolling diameter/inertia. I feel the car is even a little more nimble from a dig with the lighter wheels and wider meat.
12-21-2011, 04:23 PM
#23
Don't want to steer you wrong, but these finishes look like Satin, not textured.
I would recommend Satin finishes.
_AMG_ you can probably give some prospective comparing Satin and Texture?
I would recommend Satin finishes.
_AMG_ you can probably give some prospective comparing Satin and Texture?
Last edited by HRE_Wheels; 12-21-2011 at 04:54 PM.
12-21-2011, 05:34 PM
#25
Senior Member
Thread Starter
