What's your recommendation for custom wheel specs?
11-12-2018, 03:32 PM
#1
Member
Thread Starter
What's your recommendation for custom wheel specs?
Hi guys,
I'm in the midst of ordering custom wheels. I'm searched all over the internet and forums and was curious to know what's the most aggressive setup I can fit with just stock fenders with no adjustment on camber. The car will be lowered to the point if has a nice flush fitment.
I'm hoping to run :
-Front: 20x10+25
255/30/20
-Rear 20x11+35
305/25/20
I know this setup works just fine as a few others are running those specs, but what I'm curious to know is what's the lowest offset given the 10" and 11" widths I can run without running into brake caliper clearance?
Any help is greatly appreciate. Thanks!
I'm in the midst of ordering custom wheels. I'm searched all over the internet and forums and was curious to know what's the most aggressive setup I can fit with just stock fenders with no adjustment on camber. The car will be lowered to the point if has a nice flush fitment.
I'm hoping to run :
-Front: 20x10+25
255/30/20
-Rear 20x11+35
305/25/20
I know this setup works just fine as a few others are running those specs, but what I'm curious to know is what's the lowest offset given the 10" and 11" widths I can run without running into brake caliper clearance?
Any help is greatly appreciate. Thanks!
11-13-2018, 08:35 AM
#2
MBWorld God!
Join Date: Jul 2010
Location: 39.515509, -111.549668
Posts: 30,565
Received 3,350 Likes
on
2,806 Posts
2012 CLS63
Some wheel makers will tell you the best offsets and sizes etc. HRE for example, tell them you'd like the aggressive set up.
11-13-2018, 10:47 AM
#3
Member
Thread Starter
Hey. I’ve spoken to HRE since I’m looking at a set and what they’ve recommended is not as aggressive.. so I’m curious to see if anyone else has run lower offsets.
11-13-2018, 01:25 PM
#6
https://mbworld.org/g/picture/11698730
My attached screenshot didn't post in my earlier reply.
Hope this link works.
If not, google "Street Dreams" and search our car model on the wheels page.
My attached screenshot didn't post in my earlier reply.
Hope this link works.
If not, google "Street Dreams" and search our car model on the wheels page.
11-13-2018, 02:51 PM
#7
MBWorld God!
Join Date: Jul 2010
Location: 39.515509, -111.549668
Posts: 30,565
Received 3,350 Likes
on
2,806 Posts
2012 CLS63
How about some titanium printed wheels?
Trending Topics
11-14-2018, 02:45 PM
#8
Member
Thread Starter
Hey so I saw the photo. Was it the screenshot about wheel specs?
It gave a range on offsets. Is that the lowest that can fit? Would you mind providing more context. Thanks!
11-14-2018, 02:49 PM
#9
Hi Matt,
I don't have more context, I was just trying to be helpful.
Your likely going to have to speak to wheel manufacturer and get some details.
Good luck, and share afterwards!
Armin6.3
I don't have more context, I was just trying to be helpful.
Your likely going to have to speak to wheel manufacturer and get some details.
Good luck, and share afterwards!
Armin6.3
11-14-2018, 02:51 PM
#10
Member
Thread Starter
I appreciate the help and the quick responses. That's definitely a good starting point and from my own research I've learned those recommendations on their site can be pushed further.
11-19-2018, 01:32 PM
#12
Member
Thread Starter
Update. I'm leaning towards pushing 11.5 now in the rear with a 305.
Found that they can fit seen here.
https://wheelsboutique.com/gallery/m...-adv10-0-ts-cs
Found that they can fit seen here.
https://wheelsboutique.com/gallery/m...-adv10-0-ts-cs
