CLS500 with a AMG 55 motor installed
#76
Senior Member
Join Date: May 2007
Location: California
Posts: 405
Likes: 0
Received 0 Likes
on
0 Posts
CLS55
#77
MBWorld Fanatic!
Thread Starter
Join Date: Aug 2006
Location: Bowie, Md
Posts: 1,371
Likes: 0
Received 0 Likes
on
0 Posts
2006 CLS500 with 55 AMG motor, 2008 Infiniti G35, 2000 Plymouth Grand Voyager
I have the lights listed on the second link. The one displayed on the black E class
#78
MBWorld Fanatic!
Thread Starter
Join Date: Aug 2006
Location: Bowie, Md
Posts: 1,371
Likes: 0
Received 0 Likes
on
0 Posts
2006 CLS500 with 55 AMG motor, 2008 Infiniti G35, 2000 Plymouth Grand Voyager
Thanks Jim
Thank you guys. The car is adapting well, and the motor seems very strong so far. Doing allot of short trips here and there just to monitor the engine before I make long trips. I can't wait to drive her up to NY
There is a Supra meet/ dyno day up here in Maryland, so I might take the car to the event and get it on the dyno. I think knowing what the RWHP is now before further mods is important.
There is a Supra meet/ dyno day up here in Maryland, so I might take the car to the event and get it on the dyno. I think knowing what the RWHP is now before further mods is important.
Last edited by khelawanb; 11-09-2010 at 10:35 PM.
#80
MBWorld Fanatic!
Thread Starter
Join Date: Aug 2006
Location: Bowie, Md
Posts: 1,371
Likes: 0
Received 0 Likes
on
0 Posts
2006 CLS500 with 55 AMG motor, 2008 Infiniti G35, 2000 Plymouth Grand Voyager
#81
MBWorld Fanatic!
Thread Starter
Join Date: Aug 2006
Location: Bowie, Md
Posts: 1,371
Likes: 0
Received 0 Likes
on
0 Posts
2006 CLS500 with 55 AMG motor, 2008 Infiniti G35, 2000 Plymouth Grand Voyager
#83
MBWorld Fanatic!
Thread Starter
Join Date: Aug 2006
Location: Bowie, Md
Posts: 1,371
Likes: 0
Received 0 Likes
on
0 Posts
2006 CLS500 with 55 AMG motor, 2008 Infiniti G35, 2000 Plymouth Grand Voyager
#85
MBWorld Fanatic!
Thread Starter
Join Date: Aug 2006
Location: Bowie, Md
Posts: 1,371
Likes: 0
Received 0 Likes
on
0 Posts
2006 CLS500 with 55 AMG motor, 2008 Infiniti G35, 2000 Plymouth Grand Voyager
#86
MBWorld Fanatic!
Thread Starter
Join Date: Aug 2006
Location: Bowie, Md
Posts: 1,371
Likes: 0
Received 0 Likes
on
0 Posts
2006 CLS500 with 55 AMG motor, 2008 Infiniti G35, 2000 Plymouth Grand Voyager
#87
MBWorld Fanatic!
wires connected to paddles should be connected to the module of the gear lever .. but I am only guessing.
then, obviously, you'll need a wheel with paddles or buttons
ps: about the intrument surround I was not talking of the white side, but the black one
.. this:
Uploaded with ImageShack.us
#88
MBWorld Fanatic!
Thread Starter
Join Date: Aug 2006
Location: Bowie, Md
Posts: 1,371
Likes: 0
Received 0 Likes
on
0 Posts
2006 CLS500 with 55 AMG motor, 2008 Infiniti G35, 2000 Plymouth Grand Voyager
Hey, that looks great
I'll try the shifters later on for sure
I'll try the shifters later on for sure
hi, when you'll have the 55K gearbox, lever and modules, it shoul be possible, I guess
wires connected to paddles should be connected to the module of the gear lever .. but I am only guessing.
then, obviously, you'll need a wheel with paddles or buttons
ps: about the intrument surround I was not talking of the white side, but the black one
.. this:
Uploaded with ImageShack.us
wires connected to paddles should be connected to the module of the gear lever .. but I am only guessing.
then, obviously, you'll need a wheel with paddles or buttons
ps: about the intrument surround I was not talking of the white side, but the black one
.. this:
Uploaded with ImageShack.us
#89
MBWorld Fanatic!
I had a look for you ... but, only to make more clear just the principle !
connections seem to work like this
Uploaded with ImageShack.us
so, your steering wheel with buttons/pad will have the module N135 inside.
and it must connect to the column block (N80) where you see the red arrow.
this is the inside of the wheel
Uploaded with ImageShack.us
column N80
Uploaded with ImageShack.us
the column is probably prewired with the gear shifter block N15/5
if it is not ... that's bad, I guess
connections seem to work like this
Uploaded with ImageShack.us
so, your steering wheel with buttons/pad will have the module N135 inside.
and it must connect to the column block (N80) where you see the red arrow.
this is the inside of the wheel
Uploaded with ImageShack.us
column N80
Uploaded with ImageShack.us
the column is probably prewired with the gear shifter block N15/5
if it is not ... that's bad, I guess
Last edited by dyno; 11-13-2010 at 01:06 PM.
#90
MBWorld Fanatic!
.. you can't imagine what a nightmare it was
how long and how expensive it got
also because the first time I was cheated by a SOB from Lithuania a certain TOM or MINDAUGAS TAMOSIUNAS who formerly posted here under the name Exoticparts
unfortunately I discovered too late that he didn't deliver and had already stolen nice $$ to a lot of people in US and UK
Last edited by dyno; 11-13-2010 at 01:15 PM.
#91
MBWorld Fanatic!
Thread Starter
Join Date: Aug 2006
Location: Bowie, Md
Posts: 1,371
Likes: 0
Received 0 Likes
on
0 Posts
2006 CLS500 with 55 AMG motor, 2008 Infiniti G35, 2000 Plymouth Grand Voyager
Wow! That sucks big time. Dyno, I'm always amazed at the info you always have, on everything. Lol!
The steering column should be pre wired. If I go this route I will get the DTM steering wheel that I always wanted
The steering column should be pre wired. If I go this route I will get the DTM steering wheel that I always wanted
.. you can't imagine what a nightmare it was
how long and how expensive it got
also because the first time I was cheated by a SOB from Lithuania a certain TOM or MINDAUGAS TAMOSIUNAS who formerly posted here under the name Exoticparts
unfortunately I discovered too late that he didn't deliver and had already stolen nice $$ to a lot of people in US and UK
how long and how expensive it got
also because the first time I was cheated by a SOB from Lithuania a certain TOM or MINDAUGAS TAMOSIUNAS who formerly posted here under the name Exoticparts
unfortunately I discovered too late that he didn't deliver and had already stolen nice $$ to a lot of people in US and UK
#92
MBWorld Fanatic!
thanks.
me too i m always thinking at DTM
not for the wheel but for the cluster
..could make only the same carbon surround, not that special function it has with RPMs show instead of tempomat ..
#93
MBWorld Fanatic!
I am making an Alcantara job in the lower dash ..
so, just in case
Uploaded with ImageShack.us
... maybe in your case it would be too much carbon, as you have even the wheel in carbon
so, just in case
Uploaded with ImageShack.us
... maybe in your case it would be too much carbon, as you have even the wheel in carbon
#94
Senior Member
Join Date: May 2007
Location: California
Posts: 405
Likes: 0
Received 0 Likes
on
0 Posts
CLS55
I am making an Alcantara job in the lower dash ..
so, just in case
Uploaded with ImageShack.us
... maybe in your case it would be too much carbon, as you have even the wheel in carbon
so, just in case
Uploaded with ImageShack.us
... maybe in your case it would be too much carbon, as you have even the wheel in carbon
#95
MBWorld Fanatic!
paddles do not fit properly in place of buttons (even if somebody did it).
about the lower dash, the Alcantara making is much harder work (as usual) than we thought .
my installer got immediately into problems when it came to remove the EIS (ignition key) that holds the lower dash in place .. LOL
but nothing in comparison to the carbon surround ..
#96
MBWorld Fanatic!
Thread Starter
Join Date: Aug 2006
Location: Bowie, Md
Posts: 1,371
Likes: 0
Received 0 Likes
on
0 Posts
2006 CLS500 with 55 AMG motor, 2008 Infiniti G35, 2000 Plymouth Grand Voyager
Looks great Dyno. No more carbon for me though I might get rid idly steering wheel and do a DTM. I think the CLK 63 amg has the steering wheel that I want.
I am making an Alcantara job in the lower dash ..
so, just in case
Uploaded with ImageShack.us
... maybe in your case it would be too much carbon, as you have even the wheel in carbon
so, just in case
Uploaded with ImageShack.us
... maybe in your case it would be too much carbon, as you have even the wheel in carbon
#97
MBWorld Fanatic!
sorry if I am not with you here, but I don't see the DTM steering wheel to be in line and even the clkBS's to be well proportioned with our car...
Uploaded with ImageShack.us
Uploaded with ImageShack.us
#99
Former Vendor of MBWorld
OMG! Brent, I don't even know what to say! that is just simply incredible! I had no idea you were this crazy! LOL! I love it! Congrats on an AWESOME project and nice clean build!
#100
MBWorld Fanatic!