Conductor plate stuck. Please advise
#1
Conductor plate stuck. Please advise
I have an 06 CLS55 with the standard faulty conductor plate symptoms. All the valve body bolts and the electrical connector have been removed but the plate will not
detach from the tranny. I've searched numerous threads so i apologize to the search police if something was over looked.
detach from the tranny. I've searched numerous threads so i apologize to the search police if something was over looked.
#3
#4
Super Member
I removed the valve body out of my CLK55 (which I think is the same 5sp transmission) twice, both times it basically fell out after removing the 10 x t20 torx bolts
https://mbworld.org/forums/clk55-amg...ml#post7415590
https://mbworld.org/forums/cl55-amg-...ml#post7063434
https://mbworld.org/forums/clk55-amg...ml#post7415590
https://mbworld.org/forums/cl55-amg-...ml#post7063434
#5
Senior Member
It may be warped from the heat expansion and contraction. If you are replacing it and all solenoids are removed then just “persuade” it out.