MBWorld.org Forums
From the wall of the local Mercedes dealer.
From the wall of the local Mercedes dealer.
0 2026/01/16 04:40:32
0 2026/01/23 22:07:11
0 2026/01/26 07:25:42
0 2026/03/20 15:13:23
0 2026/03/20 15:13:27
0 2026/03/20 15:13:31
0 2026/03/20 15:13:35
video
video
0 2026/03/21 04:14:53
FCP
FCP
0 2026/03/21 04:14:54
0 2026/03/21 19:54:02
0 2026/03/23 18:12:29
All of the tools used for coils and plugs. I purposely used the most minimum amount of Tools so I could share that it could be done with just these items. I did not need anything else though if you want to measure torque on the coil bolts, you need that adapter or proper torque wrench size/scale, which I have as well. In order to do the map sensor, I added another etorx as well as a torx bit into the pile
All of the tools used for coils and plugs. I purposely used the most minimum amount of Tools so I could share that it could be done with just these items. I did not need anything else though if you want to measure torque on the coil bolts, you need that adapter or proper torque wrench size/scale, which I have as well. In order to do the map sensor, I added another etorx as well as a torx bit into the pile
0 2026/04/02 03:36:23
Coil electrode surfaces all looked pristine
Coil electrode surfaces all looked pristine
0 2026/04/02 03:36:28
This would be the plug view from sitting inside the car, same positions as the other plug pic.s
This would be the plug view from sitting inside the car, same positions as the other plug pic.s
0 2026/04/02 03:36:32
Overall the guide was dirty but still had a blue hue
Overall the guide was dirty but still had a blue hue
0 2026/05/17 08:00:05
Not much debris on the pan, no sparkles
Not much debris on the pan, no sparkles
0 2026/05/17 08:00:10
0 2026/05/17 08:00:14
Magnet captured the fines. Very silt like and no size to any of the captured material.
Magnet captured the fines. Very silt like and no size to any of the captured material.
0 2026/05/17 08:00:18
Stick something in here to make sure this bar fitting is clean, especially if oil has been cooking in there. It means water has also likely gotten in. So change the fluid jig you’re unsure of quality.
Stick something in here to make sure this bar fitting is clean, especially if oil has been cooking in there. It means water has also likely gotten in. So change the fluid jig you’re unsure of quality.
0 2026/05/18 02:19:56
0 2026/05/18 02:20:00
0 2026/05/19 06:57:19
0 2026/05/19 06:57:24
0 2026/05/19 06:58:44