MBWorld.org Forums
Super dirty, other projects underway.
Super dirty, other projects underway.
0 2025/03/29 14:03:32
0 2025/03/29 13:55:11
Rear passenger. General conditions of what the front brakes looked like too, before the clear.
Rear passenger. General conditions of what the front brakes looked like too, before the clear.
0 2025/03/29 13:54:46
Driver side post paint. It isn’t perfect, but it beats milky, chipping clearcoat
Driver side post paint. It isn’t perfect, but it beats milky, chipping clearcoat
0 2025/03/29 12:39:46
0 2025/03/29 12:38:13
Post two coats driver side
Post two coats driver side
0 2025/03/29 12:38:09
Pre paint oassenger
Pre paint oassenger
0 2025/03/29 12:38:05
Close up before passenger paint applied
Close up before passenger paint applied
0 2025/03/29 12:38:01
This one is a female plug and has the same attachment point you show, but it’s definitely not the correct part number.
This one is a female plug and has the same attachment point you show, but it’s definitely not the correct part number.
0 2025/03/16 04:11:50
0 2025/03/16 04:07:17
What she looked like with more carbon
What she looked like with more carbon
0 2024/12/17 06:35:47
0 2024/12/16 15:45:24
Super press fit means The fabric should stay in place.
Super press fit means The fabric should stay in place.
0 2024/12/16 15:45:21
0 2024/12/16 15:45:17
Turned out great imo
Turned out great imo
0 2024/12/16 15:45:14
The left side took the most time, but I used a little bit of glue between the cut outs at 12 o’clock with some clamps on a foam tube and everything set well.
The left side took the most time, but I used a little bit of glue between the cut outs at 12 o’clock with some clamps on a foam tube and everything set well.
0 2024/12/16 15:45:10
Fit and finish was pretty good. I did have to use glue in the very recessed areas. I did not want to stretch the fabric much because that puts tension on the glue during its life.
Fit and finish was pretty good. I did have to use glue in the very recessed areas. I did not want to stretch the fabric much because that puts tension on the glue during its life.
0 2024/12/16 15:45:07
My grandfather was a tailor, and I like to incorporate him into my projects.
My grandfather was a tailor, and I like to incorporate him into my projects.
0 2024/12/16 15:45:03
0 2024/12/16 15:44:59
Here you can see the poor preparation of the original surface. The left side was also delaminating.
Here you can see the poor preparation of the original surface. The left side was also delaminating.
0 2024/12/16 15:44:56
0 2024/12/12 12:29:47
0 2024/12/12 12:29:44
0 2024/12/12 12:29:40
0 2024/12/12 12:29:35
Untreated with 280,000 miles. 2000
Untreated with 280,000 miles. 2000
0 2024/12/05 13:43:22
0 2024/12/05 13:43:18
0 2024/12/05 13:43:14
Treated with 270,000 miles 2006
Treated with 270,000 miles 2006
0 2024/12/05 13:43:09
No fluid film, 2000 lc 280k miles.
No fluid film, 2000 lc 280k miles.
0 2024/12/05 10:39:46
0 2024/12/05 10:39:41
0 2024/12/05 10:39:37
For those that know lx rust issues, these pics speak for themselves, a 2006 model with nearly 270k
For those that know lx rust issues, these pics speak for themselves, a 2006 model with nearly 270k
0 2024/12/05 10:39:32
This is without fluid film from an lc of the same generation.
This is without fluid film from an lc of the same generation.
0 2024/11/04 16:37:14
0 2024/11/04 16:36:49
0 2024/11/04 16:36:46
0 2024/11/04 16:36:42
0 2024/11/04 16:36:38
This is the tab on the tray. You can not pull it strait up without spreading the armrest. a tool will mar the leather.
This is the tab on the tray. You can not pull it strait up without spreading the armrest. a tool will mar the leather.
0 2024/11/01 17:43:21
First you need to remove the tray. Spread the side or the armrest slightly outward and pull up on the corner of the tray. Do this individually to both sides. have the cup holder halfway out to make it easier.
First you need to remove the tray. Spread the side or the armrest slightly outward and pull up on the corner of the tray. Do this individually to both sides. have the cup holder halfway out to make it easier.
0 2024/11/01 17:43:20
Once inside you will see this wheel. Underneath is the spring. Carefully pry the brass retainer so that it can be reused. Go slow and dont damage the plastic pin it sits on.
Once inside you will see this wheel. Underneath is the spring. Carefully pry the brass retainer so that it can be reused. Go slow and dont damage the plastic pin it sits on.
0 2024/11/01 17:43:18