4Matic Front CV Joint
#1
Super Member
Thread Starter
4Matic Front CV Joint
It must be that time of year when things start breaking.
My front CV boot is cracked and throwing grease all over the place. Has anyone w/a 4matic replaced theirs? What was the cost?
My front CV boot is cracked and throwing grease all over the place. Has anyone w/a 4matic replaced theirs? What was the cost?
#2
1998 E320 4matic front outer cv boot replacement
I noticed both were cracked last fall and after searching every where for a boot kit ( unsuccessfully) I had my local indie replace...288.00 labor and 72 per boot...yes that is 72 dollars each for the boot! I have replace many cv boots , axle shafts and the joints themselves on vw's so this came as a shock to me.
#3
Member
Join Date: Nov 2005
Location: New England
Posts: 213
Likes: 0
Received 1 Like
on
1 Post
2000 E 320S4 210.282 4Matic Estate
I noticed both were cracked last fall and after searching every where for a boot kit ( unsuccessfully) I had my local indie replace...288.00 labor and 72 per boot...yes that is 72 dollars each for the boot! I have replace many cv boots , axle shafts and the joints themselves on vw's so this came as a shock to me.
#4
Super Member
Thread Starter
$1200? Can you send me the link?
My boot has broken -- hence the grease. I'm hoping the axle can be saved. I've driven a total of about 5 miles since it started throwing grease. No clunking/clicking noises (yet) as is typical for CVs on their way out.
My boot has broken -- hence the grease. I'm hoping the axle can be saved. I've driven a total of about 5 miles since it started throwing grease. No clunking/clicking noises (yet) as is typical for CVs on their way out.
#6
Super Member
I actually did one of these not too long ago. It was the front passenger outside CV boot. Once you get the axle out it may take about 30-45 minutes to get the axle apart, cleaned up and rebooted. It's a pretty simple and straightforward job. Just don't pop the CV joints apart incorrectly or it can be a pain in the butt getting the small ball bearings back into place.
Trending Topics
#8
Member
Join Date: Nov 2005
Location: New England
Posts: 213
Likes: 0
Received 1 Like
on
1 Post
2000 E 320S4 210.282 4Matic Estate
I took mine to the shop this morning and they found one has just cracked and started spitting grease. So just on time. It will be $290 per side parts and labor. Not too bad.