02 C240 - Code P0453 Evap Emission Control System Pressure Sensor High Input
Thread Starter
Newbie
Joined: Oct 2009
Posts: 3
Likes: 0
2002 C240
02 C240 - Code P0453 Evap Emission Control System Pressure Sensor High Input
Hey guys. My fuel pump just went out and I replaced it myself but now the CEL is on. Went to Advance and borrowed the code reader and this is the code it threw out - Code P0453 - Evap Emission Control System Pressure Sensor High Input. Anybody ever had that one? Any idea of where to start?
Thanks,
Scott
Thanks,
Scott
Last edited by sarmst100; Oct 27, 2009 at 02:29 PM. Reason: More Info
Super Moderator
Joined: Jun 2008
Posts: 19,942
Likes: 192
From: Llandudno, Cape Town, South Africa
late 2009 CLK 350 Coupe Elegance, '65 Jaguar S Type wires
Check all pipework you disturbed when changing pump - This is most likely source of the problem.
Check tank breather pipe from both tanks to filler neck to ensure that you did not kink or block it.
Check pipework to charcoal canister for kinks or blockage.
Finally check that you don't have a stuck purge valve up front in the engine compartment.
Check tank breather pipe from both tanks to filler neck to ensure that you did not kink or block it.
Check pipework to charcoal canister for kinks or blockage.
Finally check that you don't have a stuck purge valve up front in the engine compartment.
Last edited by Glyn M Ruck; Oct 29, 2009 at 07:20 PM.
Super Moderator
Joined: Jun 2008
Posts: 19,942
Likes: 192
From: Llandudno, Cape Town, South Africa
late 2009 CLK 350 Coupe Elegance, '65 Jaguar S Type wires
See this thread running concurrently for diagrams & insight.
https://mbworld.org/forums/c-class-w...fuel-tank.html
https://mbworld.org/forums/c-class-w...fuel-tank.html
