Next ML
#1
MBWorld Fanatic!
Thread Starter
Join Date: Jul 2003
Location: Lake Oswego, OR
Posts: 6,613
Received 1,189 Likes
on
856 Posts
2020 GLE 450; 2023 BMW M2 Coupe
Next ML
Doesn't seem to be too much info out there yet. I found this recent posting: http://www.motorauthority.com/blog/1...-benz-ml-class. Anyone have others?
I put in a pre-order a few months ago; since I've had one of the first of the last two generations, I may repeat, though I will consider others.
I put in a pre-order a few months ago; since I've had one of the first of the last two generations, I may repeat, though I will consider others.
#5
Senior Member
Join Date: Dec 2002
Location: Guelph, Ont. CA.
Posts: 304
Likes: 0
Received 1 Like
on
1 Post
2014 ML350 BlueTec.
Hey "V"...
1. Rusting front and back stainless steel skid plates and bolts...
2. Peeling(discoloring) and flaking weatherstripping...passenger side window.
3. 4-5 months of a thumping front suspension..control arms..ball joints...
4. Defective fuel sending unit, almost left my family and l stranded on the New York State Thruway @ 3 in the morning with a fuel gauge reading "EMPTY"..
Embarassing to be honest...for a $73,000 dollar vehicle, completely unacceptable...Almost makes me laugh when l see the Mercedes commercials claiming the "best or nothing"......Again "V"...not to shoot you down, but what is up with the part suppliers down their ??????? Maybe you could show your QC department this thread and have them keep a closer eye of these parts.............
Trending Topics
#8
Senior Member
Join Date: Oct 2008
Location: the ML/GL/R assembly line
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
2005 C230 Kompressor
C-rod, not sure on the process MBUSI uses on quality after the sale but I do know that changes happen through a model year run because of issues that come about in the field. I will pass word along though my channel.
#9
Senior Member
Join Date: Oct 2008
Location: the ML/GL/R assembly line
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
2005 C230 Kompressor
MB is always gunning for the top spot in the food chain, I imagine its heated lol. Theres alot of processes that MBUSI has to go through before the actual "customer cars" W166 roll off the line. This is why its starting when it is.
#12
Member
Join Date: Nov 2008
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
'08 IS F; '09 ML 320 Bluetec; '10 X5 35d
Not to vent on you...because l know you just put them together, but my 2010ML350 has been less than stellar...........Here is my 10 month history.....
1. Rusting front and back stainless steel skid plates and bolts...
2. Peeling(discoloring) and flaking weatherstripping...passenger side window.
3. 4-5 months of a thumping front suspension..control arms..ball joints...
4. Defective fuel sending unit, almost left my family and l stranded on the New York State Thruway @ 3 in the morning with a fuel gauge reading "EMPTY"..
Embarassing to be honest...for a $73,000 dollar vehicle, completely unacceptable...Almost makes me laugh when l see the Mercedes commercials claiming the "best or nothing"......Again "V"...not to shoot you down, but what is up with the part suppliers down their ??????? Maybe you could show your QC department this thread and have them keep a closer eye of these parts.............
1. Rusting front and back stainless steel skid plates and bolts...
2. Peeling(discoloring) and flaking weatherstripping...passenger side window.
3. 4-5 months of a thumping front suspension..control arms..ball joints...
4. Defective fuel sending unit, almost left my family and l stranded on the New York State Thruway @ 3 in the morning with a fuel gauge reading "EMPTY"..
Embarassing to be honest...for a $73,000 dollar vehicle, completely unacceptable...Almost makes me laugh when l see the Mercedes commercials claiming the "best or nothing"......Again "V"...not to shoot you down, but what is up with the part suppliers down their ??????? Maybe you could show your QC department this thread and have them keep a closer eye of these parts.............
The ML will be the first vehicle to leave our current garage.
#14
Super Member
Join Date: Dec 2001
Location: PHILIPPINES
Posts: 629
Likes: 0
Received 0 Likes
on
0 Posts
07' ML350
a completely new body W166 ML to roll out in December 2010?????????
am i reading this correctly? i thought the all new ML will be out late 2011 or early 2012.
am i reading this correctly? i thought the all new ML will be out late 2011 or early 2012.
#15
Senior Member
Join Date: Oct 2008
Location: the ML/GL/R assembly line
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
2005 C230 Kompressor
#17
MBWorld Fanatic!
Join Date: Apr 2008
Location: Ottawa, Ontario, Canada
Posts: 1,853
Likes: 0
Received 9 Likes
on
8 Posts
SLS Irridium silver,2014 GL350 BT Irridium, 2015 White Dodge RAM Hemi Quad
I just drove a 2011 ML350 yesterday as my loaner when the AMG was getting service B done to it, compared to my wifes 2009 ML350, bigger side mirrors with lane assist, there was a compass in the rearview mirror, new style 19" wheels and of course the LED light strips in place of the fog lights which remain on as the daylight running lights. I wouldnt say the 2011 sits lower, it is the same ride height and nothing else jumped out at me, in fact, parked besides my wifes 2009, from the rear looked identical.
#18
Member
Join Date: May 2010
Location: Denver / southern AZ
Posts: 205
Likes: 0
Received 2 Likes
on
2 Posts
'11 ML350
I just drove a 2011 ML350 yesterday as my loaner when the AMG was getting service B done to it, compared to my wifes 2009 ML350, bigger side mirrors with lane assist, there was a compass in the rearview mirror, new style 19" wheels and of course the LED light strips in place of the fog lights which remain on as the daylight running lights. I wouldnt say the 2011 sits lower, it is the same ride height and nothing else jumped out at me, in fact, parked besides my wifes 2009, from the rear looked identical.
#19
MBWorld Fanatic!
Join Date: Aug 2005
Location: Maryland
Posts: 1,308
Likes: 0
Received 1 Like
on
1 Post
2011 GLK350, 2010 ML350, 2008 C63 AMG
Not to vent on you...because l know you just put them together, but my 2010ML350 has been less than stellar...........Here is my 10 month history.....
1. Rusting front and back stainless steel skid plates and bolts...
2. Peeling(discoloring) and flaking weatherstripping...passenger side window.
3. 4-5 months of a thumping front suspension..control arms..ball joints...
4. Defective fuel sending unit, almost left my family and l stranded on the New York State Thruway @ 3 in the morning with a fuel gauge reading "EMPTY"..
Embarassing to be honest...for a $73,000 dollar vehicle, completely unacceptable...Almost makes me laugh when l see the Mercedes commercials claiming the "best or nothing"......Again "V"...not to shoot you down, but what is up with the part suppliers down their ??????? Maybe you could show your QC department this thread and have them keep a closer eye of these parts.............
1. Rusting front and back stainless steel skid plates and bolts...
2. Peeling(discoloring) and flaking weatherstripping...passenger side window.
3. 4-5 months of a thumping front suspension..control arms..ball joints...
4. Defective fuel sending unit, almost left my family and l stranded on the New York State Thruway @ 3 in the morning with a fuel gauge reading "EMPTY"..
Embarassing to be honest...for a $73,000 dollar vehicle, completely unacceptable...Almost makes me laugh when l see the Mercedes commercials claiming the "best or nothing"......Again "V"...not to shoot you down, but what is up with the part suppliers down their ??????? Maybe you could show your QC department this thread and have them keep a closer eye of these parts.............
I had these too:
1. Rusting front and back stainless steel skid plates and bolts...
2. Peeling(discoloring) and flaking weatherstripping...passenger side window.
3. 4-5 months of a thumping front suspension..control arms..ball joints...
But service fixed it all.
#20
Senior Member
Join Date: Oct 2008
Location: the ML/GL/R assembly line
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
2005 C230 Kompressor
#22
Senior Member
Join Date: Oct 2008
Location: the ML/GL/R assembly line
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
2005 C230 Kompressor
Put it to you this way, i had to turn in my cell phone to security to go near it. I am also not allowed to discuss what it looks like in detail.
It would be alot easier to tell you whats simular to the 164 than to tell you whats different.
It would be alot easier to tell you whats simular to the 164 than to tell you whats different.
#24
Senior Member
Join Date: Oct 2008
Location: the ML/GL/R assembly line
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
2005 C230 Kompressor
I like it overall as much as the 164. I would buy one because Im going to help build them lol.
Seriously though I would buy one for my wife(which I plan to) weither I worked there or not.
Seriously though I would buy one for my wife(which I plan to) weither I worked there or not.
#25
Junior Member
Join Date: Sep 2010
Location: VanCity (but in the 'burbs of the tri-cities)
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
GLK 350
Interesting topic here; really cool that we have a member "on the inside" so to speak . From the videos of the stealthed prototypes of the new W166, it looks like the shape (particularly nearing the back/posterior) has been changed to a more GL/GLK style. Is that something you noticed Veloci, or were we just mislead from the camo on the prototypes?