How to change S500 rotors and pads?
#1
Junior Member
Thread Starter
Join Date: Jun 2011
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
2003 Jaguar XJR, 2000 S500
How to change S500 rotors and pads?
My brake pads are completely done, and rotors are wropped the car is hard to stop. I bought it like that! I just recently got it about two weeks ago. Ive been going thru many post and forums but most are for just brake pads, I want to do the rotors too.
is it just like a standard car? with the 2 bolts that hold the caliper in, tap it slide it out and the little nut that holds the rotor. and remove that and it comes off? or is there some exotic difficult design with Mercedes?
btw this is what I bought. Ive used them before with my Jaguar (boy can they stop yur car in a flash).
http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWNX%3AIT
is it just like a standard car? with the 2 bolts that hold the caliper in, tap it slide it out and the little nut that holds the rotor. and remove that and it comes off? or is there some exotic difficult design with Mercedes?
btw this is what I bought. Ive used them before with my Jaguar (boy can they stop yur car in a flash).
http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWNX%3AIT
#2
MBWorld Fanatic!
My brake pads are completely done, and rotors are wropped the car is hard to stop. I bought it like that! I just recently got it about two weeks ago. Ive been going thru many post and forums but most are for just brake pads, I want to do the rotors too.
is it just like a standard car? with the 2 bolts that hold the caliper in, tap it slide it out and the little nut that holds the rotor. and remove that and it comes off? or is there some exotic difficult design with Mercedes?
btw this is what I bought. Ive used them before with my Jaguar (boy can they stop yur car in a flash).
http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWNX%3AIT
is it just like a standard car? with the 2 bolts that hold the caliper in, tap it slide it out and the little nut that holds the rotor. and remove that and it comes off? or is there some exotic difficult design with Mercedes?
btw this is what I bought. Ive used them before with my Jaguar (boy can they stop yur car in a flash).
http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWNX%3AIT
Nothing exotic or special.
Just make sure to have one HUGE sledge hammer , as I had to beat the living **** out of the old rotors as they were frozen on the spindle.
It will take you more time to get the car in the air and the tires off, then it does to change the brakes, IMHO
#3
Junior Member
Thread Starter
Join Date: Jun 2011
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
2003 Jaguar XJR, 2000 S500
If you have changed brakes before, as you described above, you will be fine with a MB.
Nothing exotic or special.
Just make sure to have one HUGE sledge hammer , as I had to beat the living **** out of the old rotors as they were frozen on the spindle.
It will take you more time to get the car in the air and the tires off, then it does to change the brakes, IMHO
Nothing exotic or special.
Just make sure to have one HUGE sledge hammer , as I had to beat the living **** out of the old rotors as they were frozen on the spindle.
It will take you more time to get the car in the air and the tires off, then it does to change the brakes, IMHO
I have one last question does the caliper come off like that or im going to have problems? because on most of the threads they talk about taking the caliper apart and all this other stuff for the brake pads.
and how do you bleed the brakes? ive never done that before and i think it could help if i did.
#4
MBWorld Fanatic!
1. what do you mean by it'll take me more time to get the car in the air and take the tires off? is it that easy?
2. I have one last question does the caliper come off like that or im going to have problems? because on most of the threads they talk about taking the caliper apart and all this other stuff for the brake pads.
3. and how do you bleed the brakes? ive never done that before and i think it could help if i did.
2. I have one last question does the caliper come off like that or im going to have problems? because on most of the threads they talk about taking the caliper apart and all this other stuff for the brake pads.
3. and how do you bleed the brakes? ive never done that before and i think it could help if i did.
2. Yes, a couple of bolts and they are off. NOTHING tricky. I like to reinstall the bolts with a little bit of BLUE locktite on them.
3. You do NOT need to bleed the brakes when changing out pads and rotors. And I would STRONGLY suggest that IF you have NEVER done this before,DO NOT let your MB be your first.
My local MB dealer changes my brake fluid for ma for $100. Think long and hard on this before attempting yourself.
It is NOT that difficult, but if done wrong it can lead to poor braking, loss of ABS system, etc, etc.
#6
Junior Member
Thread Starter
Join Date: Jun 2011
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
2003 Jaguar XJR, 2000 S500
What size socket are the 2 screws holding in the caliper on the rotor / spindle? I changed the pads, easiest thing ever. But I guess my rotors are really bad because the car is still hard to stop. But the pistons on the calipers I had just pushed them back with my hands and using the old brake pads. I got dirt but its nothing that some Palmolive cant take out.
#7
Junior Member
Thread Starter
Join Date: Jun 2011
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
2003 Jaguar XJR, 2000 S500
Ive taken the calipers apart to paint them lol, now all the fluid is gone. What do I do? I was just going to put some more juice in the resivore, dot 4 right? Any idea on how many it might take? and how came i get off a stripped rotor retainer bolt? it was like that when i got it.
Trending Topics
#8
MBWorld Fanatic!
Ive taken the calipers apart to paint them lol, now all the fluid is gone. What do I do? I was just going to put some more juice in the resivore, dot 4 right? Any idea on how many it might take? and how came i get off a stripped rotor retainer bolt? it was like that when i got it.
Next, the retaining allen head bolt is aluminum, just drill it out. Go SLOW with a good bit as all you need to do is pop the head. As you are replacing the rotors, it really doesn't matter if you hit into them.
Good luck
#9
Be careful with bleeding the brakes. You should use a pressure bleeder to do it. Makes it the easiest anyways. If you try the pedal pump technique, there is a good chance you will destroy the o-rings in the brake master cylinder if you press the brake petal to far. I like Mr.Amg1's solution if you have never done it before because it is difficult to change out the brake fluid in the ABS system.
#10
Junior Member
Thread Starter
Join Date: Jun 2011
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
2003 Jaguar XJR, 2000 S500
Ive bleed the brakes and they are back to like new. They stop hard. But I have some lights on the dash well messages. Whats ESP, and BAS? and the little yellow ABS is on. If I disconnect the battery and re do it. Will that reset it? Or Do I need a OBII reader or some special ABS reader?
#11
Junior Member
Join Date: Feb 2007
Location: Koblenz,Germany/Chicago Suburb,Illinois
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
2002 S320-CDI
Ive bleed the brakes and they are back to like new. They stop hard. But I have some lights on the dash well messages. Whats ESP, and BAS? and the little yellow ABS is on. If I disconnect the battery and re do it. Will that reset it? Or Do I need a OBII reader or some special ABS reader?