DIY painted sidemarkers
First start out with a can of black plasti-dip(can be bought at home depot for 5.86$), an exacto knife, some painters tape, and newspaper.


I used peeling off this tape as an example for if you ever want to take it off ! Easy easy removal, peels off just like an elasticy tape !

Make sure you clean the light with some febreeze or rubbing alcohol! Now your going to tape up/newspaper your light! (forgot to take picture before,but you get the idea) just make sure when taping you edge the tape underneath the light, it seems to be a cap so getting tape under it is easy as pie.

(the not painted part is where I Took a piece of tape off to take a pic of the peeling you can do)
Now your going to want to paint in coats. The first coat won't cover all the orange just be patient and hit it with about 4-5 coats ! Wait 10-15 minutes between coats.

Now the next step is very important ! Once you've finished, take an exacto knife and cut the edges under the cap, so the paint will separate from the tape and it won't peel off ! A quick run through with the knife is all it takes.

Now peel away at the tape/newspaper and your done !


There's a nighttime shot with the light on!
Why not just remove the light from the car then paint it? painting on the car seems to much of a risk with overspray and tape and the knife?
Trending Topics
The Best of Mercedes & AMG

You can barely see the fogs... But I kind of like how it flows with the grille still...
Guess I could try and if I don't like it, peal it off! Lol
Or has anyone seen smoke/blacked out ones yet to purchase? - I'm a chick so I don't usually spend my time searching MB parts sites



