Is a ball joint replacement doable for an oil changer?
Thread Starter
Member
Joined: Apr 2009
Posts: 222
Likes: 7
2007 ML 350 - VIN 4JGBB86E17A211020
Is a ball joint replacement doable for an oil changer?
Hi MbWorld community...thanks for the steer on the wobble issue over 65mph+ with my left front wheel. 
Is a ball joint replacement doable for someone who just does oil changes? I can always go get a Chiltons manual if thats what it takes.
I have a fair amount of tools...just curious if there is something special from a Mercedes standpoint
Is a ball joint replacement doable for someone who just does oil changes? I can always go get a Chiltons manual if thats what it takes.
I have a fair amount of tools...just curious if there is something special from a Mercedes standpoint
Junior Member
Joined: Jul 2009
Posts: 31
Likes: 0
From: Lower Slower Delaware
87 2.3-16v
it's not a special replacement...it's a PIA replacement depending on if you get new bolts or not. the A-Arms tend to seize in so you have to beat them out occasionally. and you'll need access to a press if you plan on replacing the ball joints themselves...or you could get new a-arms with the ball joints already pressed in either way it's still a semi large undertaking, plan on atleast a day for each side at worst case.
SPONSOR
Joined: May 2012
Posts: 5,081
Likes: 62
From: Harbor City, CA
Mercedes-Benz, Porsche, BMW, MINI and more!
Answer
I disagree.
The control arm does not need to come off.
There is no reason to touch the spring.
I can assure you it is not rocket science.
Take a look at this creative home made ball joint press.
http://www.peachparts.com/shopforum/2750527-post2.html
roy@pelicanparts.com
.
The control arm does not need to come off.
There is no reason to touch the spring.
I can assure you it is not rocket science.
Take a look at this creative home made ball joint press.
http://www.peachparts.com/shopforum/2750527-post2.html
roy@pelicanparts.com
.
Thread Starter
Member
Joined: Apr 2009
Posts: 222
Likes: 7
2007 ML 350 - VIN 4JGBB86E17A211020
Thanks all...new ball joint works great!
After finally having some time off off the road to have the left ball joint replaced Im very happy to say that this was the problem of my wobble.
My mechanic replaced it yesterday and now it drives on the freeway smooth as silk and goes like its on rails.
BTW if any Mb World posters live in Ohio I would recommend Tatrai Motors in New Albany...its a single owner shop that does all the hard work for shops around the central ohio area....and is very much into all types of German machinery; even has a WW2 BMW sidecar motorcycle!
Thanks again MB World posters for your help...
Next stop in the journey of my 1991 190 E 2.3 is to replace the radiator...works great while underway but if I stop for a while the temp gauge goes up to 100C...
My mechanic replaced it yesterday and now it drives on the freeway smooth as silk and goes like its on rails.
BTW if any Mb World posters live in Ohio I would recommend Tatrai Motors in New Albany...its a single owner shop that does all the hard work for shops around the central ohio area....and is very much into all types of German machinery; even has a WW2 BMW sidecar motorcycle!
Thanks again MB World posters for your help...
Next stop in the journey of my 1991 190 E 2.3 is to replace the radiator...works great while underway but if I stop for a while the temp gauge goes up to 100C...
Trending Topics
Member
Joined: Oct 2012
Posts: 244
Likes: 1
From: Columbus, OH
2002 E55 AMG, 06 C55 AMG, 72 350SL
After finally having some time off off the road to have the left ball joint replaced Im very happy to say that this was the problem of my wobble.
My mechanic replaced it yesterday and now it drives on the freeway smooth as silk and goes like its on rails.
BTW if any Mb World posters live in Ohio I would recommend Tatrai Motors in New Albany...its a single owner shop that does all the hard work for shops around the central ohio area....and is very much into all types of German machinery; even has a WW2 BMW sidecar motorcycle!
Thanks again MB World posters for your help...
Next stop in the journey of my 1991 190 E 2.3 is to replace the radiator...works great while underway but if I stop for a while the temp gauge goes up to 100C...
My mechanic replaced it yesterday and now it drives on the freeway smooth as silk and goes like its on rails.
BTW if any Mb World posters live in Ohio I would recommend Tatrai Motors in New Albany...its a single owner shop that does all the hard work for shops around the central ohio area....and is very much into all types of German machinery; even has a WW2 BMW sidecar motorcycle!
Thanks again MB World posters for your help...
Next stop in the journey of my 1991 190 E 2.3 is to replace the radiator...works great while underway but if I stop for a while the temp gauge goes up to 100C...
MB World Stories
The Best of Mercedes & AMG
7 Craziest Things AMG Gas Ever Built
Verdad Gallardo
New Electric Mercedes-AMG GT 4-Door Coupe Unveiled: 10 Things You Need to Know
Verdad Gallardo
6 Mercedes Models That Did NOT Age Well (But Are Somehow Still Cool)
Verdad Gallardo
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
Thread Starter
Member
Joined: Apr 2009
Posts: 222
Likes: 7
2007 ML 350 - VIN 4JGBB86E17A211020
Tatrai Phone #
Hi Vander...Mr Tatrai doesn't advertise...most of his business comes from dealers and existing customers.
A few years back when I moved back here from ATL I was looking for a local repair shop for our MB's. Germain and Crown do the work on my wife's newer (2007) ML but I wanted someone local for my 190E; its an airport car that gets driven to Port Columbus for biz travel and runs to the grocery store.
I asked around some of the auto parts places and they recommended Tatrai. They all said don't be put off by the modest surroundings (its a big cinder block garage behind his 80+ year old fathers house off Morse Road just south of New Albany). But when I walked in an saw all of the German motorcycles and as well as nearly new S500 awaiting repairs knew I found the right place for my 190E.
Ive had him replace the ball joint, water pump, serpentine belt and a few other things over the years. No credit cards but check and cash will do. Only works weekdays...don't expect loaner cars and free latte's but he does do a great job and really understands the MB marque.
His phone is 614 855 7079.
BTW MB's run in his blood. His father was former Hungarian WW2 air force and knows all about BD601, 605 and other MB aircraft engines....
A few years back when I moved back here from ATL I was looking for a local repair shop for our MB's. Germain and Crown do the work on my wife's newer (2007) ML but I wanted someone local for my 190E; its an airport car that gets driven to Port Columbus for biz travel and runs to the grocery store.
I asked around some of the auto parts places and they recommended Tatrai. They all said don't be put off by the modest surroundings (its a big cinder block garage behind his 80+ year old fathers house off Morse Road just south of New Albany). But when I walked in an saw all of the German motorcycles and as well as nearly new S500 awaiting repairs knew I found the right place for my 190E.
Ive had him replace the ball joint, water pump, serpentine belt and a few other things over the years. No credit cards but check and cash will do. Only works weekdays...don't expect loaner cars and free latte's but he does do a great job and really understands the MB marque.
His phone is 614 855 7079.
BTW MB's run in his blood. His father was former Hungarian WW2 air force and knows all about BD601, 605 and other MB aircraft engines....
