C63s Coupe - Obsidian Black
#335
MBWorld Fanatic!
Thread Starter
This threads has been a bit inactive of late - Let's get things buzzing again!
New changes coming, my wheels are almost ready and should be here soon (in Oz away from everything). Took me ages to decide but pretty happy with my final decision. 20x10 & 20x11 - 2 Piece forged - Gloss Gunmetal, Polished Lip and Gloss Black Hardware. We tried to get as concave front and rears as possible.
I will be happy to sell my current ECS spacers with blots etc... if anyone wants them you can send me a message and make an offer - 20mm front & 10mm rears. Happy to ship worldwide. Will be available as soon as my new wheels go on.
Here is a little teaser I got from my shop. Just finalizing, then getting sent to OZ. Hopefully have them on next week or the week after.
Can't wait to get these new shoes on the hammer!
New changes coming, my wheels are almost ready and should be here soon (in Oz away from everything). Took me ages to decide but pretty happy with my final decision. 20x10 & 20x11 - 2 Piece forged - Gloss Gunmetal, Polished Lip and Gloss Black Hardware. We tried to get as concave front and rears as possible.
I will be happy to sell my current ECS spacers with blots etc... if anyone wants them you can send me a message and make an offer - 20mm front & 10mm rears. Happy to ship worldwide. Will be available as soon as my new wheels go on.
Here is a little teaser I got from my shop. Just finalizing, then getting sent to OZ. Hopefully have them on next week or the week after.
Can't wait to get these new shoes on the hammer!
The following users liked this post:
Sanch (01-12-2017)
#337
Super Member
This threads has been a bit inactive of late - Let's get things buzzing again!
New changes coming, my wheels are almost ready and should be here soon (in Oz away from everything). Took me ages to decide but pretty happy with my final decision. 20x10 & 20x11 - 2 Piece forged - Gloss Gunmetal, Polished Lip and Gloss Black Hardware. We tried to get as concave front and rears as possible.
I will be happy to sell my current ECS spacers with blots etc... if anyone wants them you can send me a message and make an offer - 20mm front & 10mm rears. Happy to ship worldwide. Will be available as soon as my new wheels go on.
Here is a little teaser I got from my shop. Just finalizing, then getting sent to OZ. Hopefully have them on next week or the week after.
Can't wait to get these new shoes on the hammer!
New changes coming, my wheels are almost ready and should be here soon (in Oz away from everything). Took me ages to decide but pretty happy with my final decision. 20x10 & 20x11 - 2 Piece forged - Gloss Gunmetal, Polished Lip and Gloss Black Hardware. We tried to get as concave front and rears as possible.
I will be happy to sell my current ECS spacers with blots etc... if anyone wants them you can send me a message and make an offer - 20mm front & 10mm rears. Happy to ship worldwide. Will be available as soon as my new wheels go on.
Here is a little teaser I got from my shop. Just finalizing, then getting sent to OZ. Hopefully have them on next week or the week after.
Can't wait to get these new shoes on the hammer!
The following users liked this post:
Sanch (01-12-2017)
#338
Hey Sanch, I've enjoyed watching this thread and it's turned me from longtime lurker to participant! I currently have an ML63 but have a C63S estate on order. Always had a thing for fast estates and now is the time. I've got 6 months to wait for the factory order (selenite grey, red pepper interior, carbon interior) and am planning to order wheels ahead of it's arrival.
I have landed on BC Forged as my preference and wanted to ask about your spec (which looks fantastic). How did you work out the right offset to go up a size on front and wider on rear? I want to widen the rims but stay 19 and avoid spacers if I can (car will see track work occasionally). I'm in Melbourne and there are no decent performance shops down here to talk to - all they know is over boosting WRXs and slamming Holden utes. Tedious.
I'm in Sydney a lot so might talk to the firm whose name is conveniently displayed over your number plates!
Cheers.
I have landed on BC Forged as my preference and wanted to ask about your spec (which looks fantastic). How did you work out the right offset to go up a size on front and wider on rear? I want to widen the rims but stay 19 and avoid spacers if I can (car will see track work occasionally). I'm in Melbourne and there are no decent performance shops down here to talk to - all they know is over boosting WRXs and slamming Holden utes. Tedious.
I'm in Sydney a lot so might talk to the firm whose name is conveniently displayed over your number plates!
Cheers.
The following users liked this post:
Sanch (01-12-2017)
#339
Junior Member
This threads has been a bit inactive of late - Let's get things buzzing again!
New changes coming, my wheels are almost ready and should be here soon (in Oz away from everything). Took me ages to decide but pretty happy with my final decision. 20x10 & 20x11 - 2 Piece forged - Gloss Gunmetal, Polished Lip and Gloss Black Hardware. We tried to get as concave front and rears as possible.
I will be happy to sell my current ECS spacers with blots etc... if anyone wants them you can send me a message and make an offer - 20mm front & 10mm rears. Happy to ship worldwide. Will be available as soon as my new wheels go on.
Here is a little teaser I got from my shop. Just finalizing, then getting sent to OZ. Hopefully have them on next week or the week after.
Can't wait to get these new shoes on the hammer!
New changes coming, my wheels are almost ready and should be here soon (in Oz away from everything). Took me ages to decide but pretty happy with my final decision. 20x10 & 20x11 - 2 Piece forged - Gloss Gunmetal, Polished Lip and Gloss Black Hardware. We tried to get as concave front and rears as possible.
I will be happy to sell my current ECS spacers with blots etc... if anyone wants them you can send me a message and make an offer - 20mm front & 10mm rears. Happy to ship worldwide. Will be available as soon as my new wheels go on.
Here is a little teaser I got from my shop. Just finalizing, then getting sent to OZ. Hopefully have them on next week or the week after.
Can't wait to get these new shoes on the hammer!
The following users liked this post:
Sanch (01-12-2017)
#341
MBWorld Fanatic!
Thread Starter
Hey Sanch, I've enjoyed watching this thread and it's turned me from longtime lurker to participant! I currently have an ML63 but have a C63S estate on order. Always had a thing for fast estates and now is the time. I've got 6 months to wait for the factory order (selenite grey, red pepper interior, carbon interior) and am planning to order wheels ahead of it's arrival.
I have landed on BC Forged as my preference and wanted to ask about your spec (which looks fantastic). How did you work out the right offset to go up a size on front and wider on rear? I want to widen the rims but stay 19 and avoid spacers if I can (car will see track work occasionally). I'm in Melbourne and there are no decent performance shops down here to talk to - all they know is over boosting WRXs and slamming Holden utes. Tedious.
I'm in Sydney a lot so might talk to the firm whose name is conveniently displayed over your number plates!
Cheers.
I have landed on BC Forged as my preference and wanted to ask about your spec (which looks fantastic). How did you work out the right offset to go up a size on front and wider on rear? I want to widen the rims but stay 19 and avoid spacers if I can (car will see track work occasionally). I'm in Melbourne and there are no decent performance shops down here to talk to - all they know is over boosting WRXs and slamming Holden utes. Tedious.
I'm in Sydney a lot so might talk to the firm whose name is conveniently displayed over your number plates!
Cheers.
Yes definitely check out BMR and speak to Stuart. He's the owner and knows me well let him know sanch sent you, he will look after you.
#344
Junior Member
#346
MBWorld Fanatic!
Thread Starter
Thanks mate, most likely will have it on the car next week due to the public holiday in Oz.
Here is another sneak peek of the wheels just on my tires now... This wait feels like the one when I was waiting for the car lol
Here is another sneak peek of the wheels just on my tires now... This wait feels like the one when I was waiting for the car lol
#350
Super Member
That is a very nice looking wheel I'm a big fan of the stock wheels on my car but if they do those with the spokes in satin black or maybe gloss black I might buy a set!