FS Feeler - MBH Headers, Mids, X-pipe - Calling alll Chicagoland area folks
#1
Senior Member
Thread Starter
Join Date: May 2012
Location: Chicago, IL
Posts: 402
Likes: 0
Received 0 Likes
on
0 Posts
C63
FS Feeler - MBH Headers, Mids, X-pipe - Calling alll Chicagoland area folks
So I have finally decided to let go of my MBH setup. I traded in the C63 for a 2014 Jeep SRT and was holding out that I might pick another W204 C63 up, but seeing all the new cars on the horizon I will probably go in a different direction for a summer car.
Anyway, I haven't been following mbworld as much as I used to so I am putting out a feeler.
I have the full setup, headers, mids, x-pipe with just under 7k miles on them. I'just decided to puchase a full header and exhaust setup for my Jeep and with that step, I knew I would no longer be needing my C63 setup.
With my EC v5 tune, ROW airboxes, and MBH setup, I was able to run an 11.9xx with a leaky intake manifold and a total weight of somewhere around 4460 lbs. The car was a beast to say the least and I loved it, but winters sucked.
I'm looking to get rid of the whole setup for $2600 firm and would prefer someone in the Chicagoland area to sell to since it would be cool to meet the person who is going to love this setup as much as I did. I'd even throw in my Wesitec catch can.
Personally I think this is a great deal and probably worth a couple hundred more, but I don't like haggling and bull*****. Mike over at MBH has done some excellent work and these headers are awesome.
It would be even cooler to run against the person at the drag strip after they have it installed and my Jeep has the headers and exhaust installed. I'll probably lose, but I'm ok with that.
Again, this is a feeler to gauge interest, but if you're from or near Chicago, hit me up for sure if you're interested.
Here's a video of how the setup sounded after it was installed.
www.youtube.com/watch?v=Mv9QAx-8QKA
Sorry - forgot how to make the link show as a video.
Anyway, I haven't been following mbworld as much as I used to so I am putting out a feeler.
I have the full setup, headers, mids, x-pipe with just under 7k miles on them. I'just decided to puchase a full header and exhaust setup for my Jeep and with that step, I knew I would no longer be needing my C63 setup.
With my EC v5 tune, ROW airboxes, and MBH setup, I was able to run an 11.9xx with a leaky intake manifold and a total weight of somewhere around 4460 lbs. The car was a beast to say the least and I loved it, but winters sucked.
I'm looking to get rid of the whole setup for $2600 firm and would prefer someone in the Chicagoland area to sell to since it would be cool to meet the person who is going to love this setup as much as I did. I'd even throw in my Wesitec catch can.
Personally I think this is a great deal and probably worth a couple hundred more, but I don't like haggling and bull*****. Mike over at MBH has done some excellent work and these headers are awesome.
It would be even cooler to run against the person at the drag strip after they have it installed and my Jeep has the headers and exhaust installed. I'll probably lose, but I'm ok with that.
Again, this is a feeler to gauge interest, but if you're from or near Chicago, hit me up for sure if you're interested.
Here's a video of how the setup sounded after it was installed.
www.youtube.com/watch?v=Mv9QAx-8QKA
Sorry - forgot how to make the link show as a video.
#4
MBWorld Fanatic!
Join Date: Jun 2008
Location: Los Angeles
Posts: 8,063
Received 2,845 Likes
on
1,678 Posts
2012 P31 C63 Coupe Trackrat, 2019 GLE63S Coupe Beast
That's a great deal. GLWS
#5
Senior Member
I am from chicago and i might be interested. No race cats? are the Rox Boxes included? How did you get through emissions, also do you mind sending me a message on where you got it installed from and how much you paid for it? Thanks
nvm I think i had asked you this before. Speedriven in palatine right?
nvm I think i had asked you this before. Speedriven in palatine right?
#7
Senior Member
Thread Starter
Join Date: May 2012
Location: Chicago, IL
Posts: 402
Likes: 0
Received 0 Likes
on
0 Posts
C63
ROW air boxes were sold to a friend.
I ran completely catless and ended up trading it in back at stock before emissions testing. I have a pair of O2 spacers I would have used for emissions.
I should state that I am not looking to part this out. It's all or nothing, but I appreciate those who have PM'd me asking. I'll respond to your OM's shortly.
Like I said, I'm hoping to find a good home for these in Chicago. I don't have to get rid of them, but I know they're going to make someone VERY happy. If I don't get any buyers then they will sit in my basement and maybe I'll hunt down a '14 507 Edition in the future.
I ran completely catless and ended up trading it in back at stock before emissions testing. I have a pair of O2 spacers I would have used for emissions.
I should state that I am not looking to part this out. It's all or nothing, but I appreciate those who have PM'd me asking. I'll respond to your OM's shortly.
Like I said, I'm hoping to find a good home for these in Chicago. I don't have to get rid of them, but I know they're going to make someone VERY happy. If I don't get any buyers then they will sit in my basement and maybe I'll hunt down a '14 507 Edition in the future.