My windows and seats stopped working......
#1
Junior Member
Thread Starter
Join Date: Aug 2016
Location: Suffolk, Va
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
2001 Mercedes CL600
My windows and seats stopped working......
Hello group, my windows & seats suddenly stopped working and now my drivers window is stuck partially open so I need advice asap. Would it be the door control module or is there a fuse I can check? Thank you in advance for any insight.
#4
Super Member
I've seen this happen on a few different MB cars from that era. In those circumstances, the issue was cured by simply re-starting the car. Make sure your ignition is off, open the driver door, then start the car again.
Not a permanent fix, but should get you rolling again.
Not a permanent fix, but should get you rolling again.
#5
Junior Member
Thread Starter
Join Date: Aug 2016
Location: Suffolk, Va
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
2001 Mercedes CL600
I've seen this happen on a few different MB cars from that era. In those circumstances, the issue was cured by simply re-starting the car. Make sure your ignition is off, open the driver door, then start the car again.
Not a permanent fix, but should get you rolling again.
Not a permanent fix, but should get you rolling again.
#6
Junior Member
Thread Starter
Join Date: Aug 2016
Location: Suffolk, Va
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
2001 Mercedes CL600
Rob CL, I tried your suggestion, it worked the second time but still not consistent. The passenger window works when the door is opened or closed to seal and unsealed but does not work with the switch to fully open or close. And the drivers side doesn't work at all, not even the seats or mirrors. I think I just might have to go ahead and change the drivers door control unit behind the switch.