Steps for replacing ESP module on CL 600
#1
Member
Thread Starter
Join Date: May 2013
Location: Florida
Posts: 120
Received 0 Likes
on
0 Posts
2008 S65 AMG, 2005 SL65 AMG, 2005 Porsche Carrera, 2011 Shelby GT500, 2001 Acura CL Type S
Steps for replacing ESP module on CL 600
I was wondering if anyone has posted or can post instructions (steps) for replacing the ESP module for 2003 CL 600. I had the car diagnosed and ESP is throwing an error "cannot execute torque request". Car runs but ESP acts up from time to time and I ordered another one and would like to replace it myself - it looks like plug & play module so it is worth a try.
Thank you,
S.
Thank you,
S.
#2
MBworld Guru
The module is located in the fuse box on the driver's side towards the windshield. There are locks on each side of the box you slide towards you and it unlocks the cover. The ESP module is the one on the inside (the outer one is the ABC module).
#3
Member
Thread Starter
Join Date: May 2013
Location: Florida
Posts: 120
Received 0 Likes
on
0 Posts
2008 S65 AMG, 2005 SL65 AMG, 2005 Porsche Carrera, 2011 Shelby GT500, 2001 Acura CL Type S
ESP
thank you. It turns out, there was some corrosion on the connector of the ESP module. When I look closer at that fuse box, it is not much of a protection for such a critical component such as ESP (it is open on one side, towards the windshield and in that corner one can find a "nest" of leaves blown in).
Also, your "ABC Delete" thread is awe-inspiring .
Also, your "ABC Delete" thread is awe-inspiring .
#4
MBworld Guru
thank you. It turns out, there was some corrosion on the connector of the ESP module. When I look closer at that fuse box, it is not much of a protection for such a critical component such as ESP (it is open on one side, towards the windshield and in that corner one can find a "nest" of leaves blown in).
Also, your "ABC Delete" thread is awe-inspiring .
Also, your "ABC Delete" thread is awe-inspiring .
Last edited by OCKlasse; 10-22-2014 at 11:55 PM.