AZN Optics - CLS Storefront
#77
Super Member
Please email me again @ inlukk@gmail.com. The other license plate light went out now. Thanks.
for good customer service last time too.
John
for good customer service last time too.
John
#78
SPONSOR/MBworld Guru
Thread Starter
shot you an email of the new design. You should probably remove your private email though. PM me next time when posting personal identification information to protect yourself.
#80
SPONSOR/MBworld Guru
Thread Starter
New V5 design is now available. These utilize cooler burning COB based diodes matched with our surge protection circuitry from our V4 line.
Offered in 4300K (matches better with OEM halogen and older HIDs) and 5000K (pure white)
4300K: http://www.aznoptics.com/index.php?m...products_id=96
5000K: http://www.aznoptics.com/index.php?m...products_id=95
Offered in 4300K (matches better with OEM halogen and older HIDs) and 5000K (pure white)
4300K: http://www.aznoptics.com/index.php?m...products_id=96
5000K: http://www.aznoptics.com/index.php?m...products_id=95
#81
SPONSOR/MBworld Guru
Thread Starter
AZN Optics is now offering next generation Morimoto XB35 HID conversion kits. Available for order on our site www.aznoptics.com or PM us for more details.
#84
SPONSOR/MBworld Guru
Thread Starter
Sharing a pic provided by one of our customers of our new V5 194 wedge LEDs and the level of brightness the new design has with just the city lights by themselves.
#86
SPONSOR/MBworld Guru
Thread Starter
bump
Working on adapting our V5 design to festoon models which should be available January.
Working on adapting our V5 design to festoon models which should be available January.
#88
SPONSOR/MBworld Guru
Thread Starter
Have halogen reflectors and don't want to blind oncoming traffic with an HID conversion? Good call! We also carry full line of Morimoto Bi-Xenon projector retrofit kits from FX-R stage III and IV to Morimoto Mini Stage III!
#89
SPONSOR/MBworld Guru
Thread Starter
You've spoken and we've listened. Due to the large amount of real estate the COB chip took up where space is at a premium, our V5 design had to locate the resistors at the base of the unit which made for harder installation. We've made a swap for new Samsung SMD chip while keeping the core V5 component design which allows us to move the resistor away from the base for trouble free install in our new V5.1 design:
http://www.aznoptics.com/index.php?m...roducts_id=112
We at AZN Optics always strive to improve our products and we listen to feedback from our customers.
http://www.aznoptics.com/index.php?m...roducts_id=112
We at AZN Optics always strive to improve our products and we listen to feedback from our customers.
#92
SPONSOR/MBworld Guru
Thread Starter
http://www.aznoptics.com/index.php?m...products_id=50
#94
SPONSOR/MBworld Guru
Thread Starter
Unfortunately out of stock. We're working on a redesign, but currently in prototype phase.
#98
SPONSOR/MBworld Guru
Thread Starter
Some of you know this, but for those who haven't checked, we've released a new V5.2a model that uses the latest CREE XBD chipset. Wrapped in a heat shielding shell with gel coat, these might look small, but pack a well balanced brightness while burning cooler than previous designs. Check them out!
http://www.aznoptics.com/index.php?m...roducts_id=114
http://www.aznoptics.com/index.php?m...roducts_id=114