1999 ML430 Need programming help for Keyless Entry

marinabay402 · 07-19-2007, 12:26 AM

I need to program a new remote for my 1999 ML430, anyone have the instructions? Thanks.

To remove this ad, register today or login if you already are registered!

Bighouse · 07-26-2007, 07:40 AM

I have a 99 ML320. To reset/program the key my manual says to insert the key into the ignition and turn it to position 2. Then remove the key and within 60 seconds hold down the lock doors button and press the unlock doors button 5 times.

Would be interested to know if this works.

MikeC825 · 01-31-2011, 12:42 PM

Did this procedure work with your 99?? Thanks

c3212571 · 02-11-2011, 11:37 PM

stick key in ign.
pull it out
get out of car
shut door
first make sure your batteries in remote are good
1.hold down lock button
2.while lock button held down, hit unlock button 5 times
3.release a buttons and hit any button
*1-3 steps need to be done within 5 seconds!

Mike's ML · 02-12-2011, 11:41 AM

If you have a new key the remote's keyless entry and alarm can be programmed by you with the instructions given above.

However the DAS function can only be programmed by the dealer.
If you purchased the key from EBAY all I can say is good luck. The dealer will do nothing for you. If you purchased from a Mercedes dealer they should have programmed all the functions for you. The Dealer needs both a new factory supplied key and the vehicle to marry key and the AAM's/DAS security codes together.
Mike

01-31-2011, 12:42 PM	#3
MikeC825 Junior Member Garage is empty, add now Join Date: Jun 2008 Posts: 27 Drives: ML430	remote procedure Did this procedure work with your 99?? Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

07-26-2007, 07:40 AM	#2
Bighouse Newbie Garage is empty, add now Join Date: Jul 2007 Location: England Posts: 8 Drives: 1999 ML 320	I have a 99 ML320. To reset/program the key my manual says to insert the key into the ignition and turn it to position 2. Then remove the key and within 60 seconds hold down the lock doors button and press the unlock doors button 5 times. Would be interested to know if this works.

02-11-2011, 11:37 PM	#4
c3212571 Junior Member Garage is empty, add now Join Date: Sep 2010 Posts: 38 Drives: 2002 Mercedes c32 1998 Toyota tacoma 2002 Honda Cbr600f4i	stick key in ign. pull it out get out of car shut door first make sure your batteries in remote are good 1.hold down lock button 2.while lock button held down, hit unlock button 5 times 3.release a buttons and hit any button *1-3 steps need to be done within 5 seconds!

02-12-2011, 11:41 AM	#5
Mike's ML Member Garage is empty, add now Join Date: Jul 2004 Location: New England Posts: 194 Drives: 1990 190E 2.6, ... 1998 ML320, 2005 ML500SE	If you have a new key the remote's keyless entry and alarm can be programmed by you with the instructions given above. However the DAS function can only be programmed by the dealer. If you purchased the key from EBAY all I can say is good luck. The dealer will do nothing for you. If you purchased from a Mercedes dealer they should have programmed all the functions for you. The Dealer needs both a new factory supplied key and the vehicle to marry key and the AAM's/DAS security codes together. Mike

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)