Anyone local to MD, need help!
10-20-2014, 05:45 PM
#1
Anyone local to MD, need help!
I'm at the point where I'm ready to sell the car & Lose a bunch of money! The car is giving me problem after problem.. Anyone local that is a e55 specialist I'm willing to pay !!!
10-20-2014, 05:55 PM
#3
Trending Topics
10-21-2014, 04:10 AM
#9
MBWorld Fanatic!
Any codes?,I have same mods ,had similar problem a few times,had bad MAP sensor,it's a btch to change,also ck wire harness connections to TB,my CEL never came on but I pulled codes with my scanner.good luck
10-21-2014, 01:37 PM
#13
10-21-2014, 05:01 PM
#18
PLATINUM SPONSOR
__________________
E63 Biturbo, UPD Cold Air induction kit, UPD performance crank pulley and UPD adjustable rear suspension with ride height adjustment.
CL55 UPD Cold Air Boost kit, UPD 3000 stall converter, UPD 77mm SC clutched pulley and beltwrap kit, Custom long tubes, UPD crank pulley , UPD suspension kit, UPD SC pulley, Aux. HE, Trunk tank w/rule 2000 pump, Mezeire pump, UPD 5pc idler set, Aluminum rotor hats.
www.ultimatepd.com
instagram @ultimate_pd
facebook.com/ultimatepd
E63 Biturbo, UPD Cold Air induction kit, UPD performance crank pulley and UPD adjustable rear suspension with ride height adjustment.
CL55 UPD Cold Air Boost kit, UPD 3000 stall converter, UPD 77mm SC clutched pulley and beltwrap kit, Custom long tubes, UPD crank pulley , UPD suspension kit, UPD SC pulley, Aux. HE, Trunk tank w/rule 2000 pump, Mezeire pump, UPD 5pc idler set, Aluminum rotor hats.
www.ultimatepd.com
instagram @ultimate_pd
facebook.com/ultimatepd
10-21-2014, 09:26 PM
#20
MBWorld Fanatic!
Paul is my best friend, FYI. Not that it really matters though in this case.
I hope he can help out to pinpoint the problem. He figured out many small problems with my CLS.
I hope he can help out to pinpoint the problem. He figured out many small problems with my CLS.
10-21-2014, 10:50 PM
#21
10-23-2014, 01:14 PM
#22
Talked to Paul this morning, he said the car is down on power.. Around 4k Rpm it starts to pull timing/dump fuel & my AFR is in the 9's ... He's swapping the plugs out now, & going to run it on the Dyno again today..
