Mark this thread as Unsold
19" staggered iForged Swifts - reconditioned - must sell!
#1
19" staggered iForged Swifts - reconditioned - must sell!
For sale - reconditioned set of iForged Swifts in 8.5" and 9.5" widths for 5x112 fitment. Rims are fresh matte (not flat) black centers with chromed lips. See below for all specs and link to photo gallery for 100+ pics showing full rebuild and all components throughout the process overall.
Potential Mercedes, Audi or VW fitment.
19" x 8.5" ET36
19" x 9.5" ET45
These rims were bought for my 500E, but the condition and offset were horribly misrepresented by the previous seller and they will not clear the calipers on my W124. With a horrible paint job, 2 cracked inner barrels and a badly damaged lip, my only option was a fully refresh and list them for sale. I just don't have a car these will work on.
As you can see in the pics, the rims were broken completely down, inner barrels (2) replaced, the other 2 stripped to aluminum, the faces were stripped to bare aluminum and repainted, and the lips were cleaned and polished as much as possible. One outer lip was also replaced due to poor condition of original. Dry fit, proper torque specs and proper seam seal on barrels. Minus some rash still existing on the lips, these are about as clean as you could hope for a used set of rims. See pics for details on the process and to what extent each part was cleaned/painted/polished. Every effort was made for these to be as nice as they could be.
103 photos can be found here:
https://flic.kr/s/aHskgScMeT
Asking $1,750 + shipping. Will listen to all reasonable offers. These must go.
Email/PM with any questions.
Potential Mercedes, Audi or VW fitment.
19" x 8.5" ET36
19" x 9.5" ET45
These rims were bought for my 500E, but the condition and offset were horribly misrepresented by the previous seller and they will not clear the calipers on my W124. With a horrible paint job, 2 cracked inner barrels and a badly damaged lip, my only option was a fully refresh and list them for sale. I just don't have a car these will work on.
As you can see in the pics, the rims were broken completely down, inner barrels (2) replaced, the other 2 stripped to aluminum, the faces were stripped to bare aluminum and repainted, and the lips were cleaned and polished as much as possible. One outer lip was also replaced due to poor condition of original. Dry fit, proper torque specs and proper seam seal on barrels. Minus some rash still existing on the lips, these are about as clean as you could hope for a used set of rims. See pics for details on the process and to what extent each part was cleaned/painted/polished. Every effort was made for these to be as nice as they could be.
103 photos can be found here:
https://flic.kr/s/aHskgScMeT
Asking $1,750 + shipping. Will listen to all reasonable offers. These must go.
Email/PM with any questions.
Last edited by e55dallas; 09-23-2015 at 10:19 AM.