How on earth do you remove the door handles
11-20-2006, 10:11 PM
#1
Newbie
Thread Starter
Join Date: Nov 2006
Location: South Australia
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
190E 1989 2.0 carb
How on earth do you remove the door handles
I am wanting to remove the exterior door handles and door mirror covers to paint them the same colour as the body with automotive spray paint and clear coat, does anyone have any ideas on how i should go about revoving these handles, or will i have to take it somewhere to do this? I certainly do not want to damage this car. 
11-20-2006, 10:45 PM
#2
MBWorld Fanatic!
Join Date: Dec 2002
Location: Scottsdale, Arizonai
Posts: 2,719
Likes: 0
Received 1 Like
on
1 Post
'85 190E 2.3-16 '99 C280 '11 GLK350
http://mb.braingears.com/201_DISK1/PDF/10015.pdf
In summary, you have to
remove the interior door cards
remove the round door plug from the rear edge of the door
loose the allen nut thru the door plug
insert the door key into the lock, turn 60 degrees to the rear, while pushing towards the rear of the car, the assembly will slide out.
Once the lock piece is out, you can push the handle towards the rear and remove the handle
The mounting trim on the door is held in by screws.
In summary, you have to
remove the interior door cards
remove the round door plug from the rear edge of the door
loose the allen nut thru the door plug
insert the door key into the lock, turn 60 degrees to the rear, while pushing towards the rear of the car, the assembly will slide out.
Once the lock piece is out, you can push the handle towards the rear and remove the handle
The mounting trim on the door is held in by screws.
12-13-2006, 10:40 PM
#5
Member
Join Date: Jun 2002
Location: Vancouver, BC, Canada
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
See sig
