Remove under dash panel??
#1
Newbie
Thread Starter
Join Date: Aug 2003
Location: N. Alabama
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Remove under dash panel??
Have to replace my stop light switch, but of course have to remove the drivers under dash panel (knee bolster) to get to it. Removed a single screw in the rear I found and the nut under the carpet but is still fastened somehow to the dash. Hate doing things for the first time...........
Thanks; Don, 1993 190E 2.6
Thanks; Don, 1993 190E 2.6
#2
where those two strips are that are a different color on that bolster near the top, pry them off wtih a screw driver. There should be three philips head screws. Then take off that washer you found and voila. Also check out 190revolution.net for more help.
#3
Newbie
Thread Starter
Join Date: Aug 2003
Location: N. Alabama
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Supermoose. Once I got the cover off it took all of 10 minutes to complete the switch replacement. It's always the little things you don't know that hold you up. Don