Fault code reader issue
#1
Member
Thread Starter
Join Date: Feb 2006
Location: Washington
Posts: 180
Likes: 0
Received 0 Likes
on
0 Posts
1990 300CE, 1984 190e 2.3 (sold)
Fault code reader issue
When looking at the fault code reader instructions on this forum, i see it says insert black into pin 1, red into 16, and the other into whatever you want to check.
My problem: My 16 pin is empty!
Any ideas? I have contacts in #'s: 1,3,6,7,8,14.
Thanks,
Michael
My problem: My 16 pin is empty!
Any ideas? I have contacts in #'s: 1,3,6,7,8,14.
Thanks,
Michael
#2
MBWorld Fanatic!
Join Date: Jun 2005
Location: San Diego Californ-i-a
Posts: 1,467
Likes: 0
Received 0 Likes
on
0 Posts
89 300TE, and 68 280sel
maybe try posting at http://www.mercedesshop.com/shopforum/index.php
#3
Member
Thread Starter
Join Date: Feb 2006
Location: Washington
Posts: 180
Likes: 0
Received 0 Likes
on
0 Posts
1990 300CE, 1984 190e 2.3 (sold)
relief
Here is an amazing link for fault code reader information for Mercedes. Many of us just have home made readers, but the information for the pins, and codes is still relevant.
http://www.geocities.com/MotorCity/D.../cs1000_mb.pdf
http://www.geocities.com/MotorCity/D.../cs1000_mb.pdf
#5
Member
Thread Starter
Join Date: Feb 2006
Location: Washington
Posts: 180
Likes: 0
Received 0 Likes
on
0 Posts
1990 300CE, 1984 190e 2.3 (sold)
happened to click on the right link after a search on google. For those who will use that link, use your chassis code to determine which code set to use.
Last edited by BenzBro; 04-25-2007 at 02:15 PM.