Bi-Xenons Look Depo Projectors Installed :))
It took about 2-3 hours all up thanks to the DIY instructions and i didn't remove the whole bumper to put them in.
Also installed 6000k HIDs, they look awsome.
Heres some pics:


I Hid the HID Ballasts behind the bumper so there not visable in the engine bay.

Tucked away all the wiaring.



Good choice, the car looks much better than the frostie headlights.
What is that purple thing for?
Good choice, the car looks much better than the frostie headlights.
What is that purple thing for?
Thanks, the Install was pretty straight forward and easy. Just take some time to do it slowly and not to break any plastic clips etc..
My depos are pretty level, the purple line is the vacuum line that plugs into the headlights. This is for the pneumatic level switch in the cabin so i can adjust the level/height from the factory levelling switch inside so theres no levelling screws on my headlights.
Trending Topics
The Best of Mercedes & AMG
I drove it last night and it lights up the road pretty well, Alot brighter then standard and i can deffinatley see further then the stock lights.
The cut offs are the same as what te stock headlights are and have a blueish/purplish cut off line.
Im Using 35w 6000k HID's, there are no error messages. The Bulbs are phillips. There is a built in resistor inside these balasts so there is no need for external warning cancelors and no dash warnings come up.
http://www.autopartswarehouse.com/sk...s+%26+Lighting
will these fit and perform the same as yours........please help...
thankx
Javvy
Last edited by Javvy; Apr 26, 2010 at 11:08 AM.
http://cgi.ebay.com/ebaymotors/Merce...-/160426711719
please help
or is that you just buy the regular projector type of headlights as above and install a bi-xenon PNP HID kit????.....if you do so what happens to the halogen high beams........how do you wire it up.........do you get bi-xenon PNP hid kits for the type of bulb that these headlights take?????
oh dame so many questions???? "benzc200k".............please help.....please tell us how you installed your set up..........
Last edited by Javvy; Apr 26, 2010 at 11:08 AM.
https://mbworld.org/forums/c-class-w...bout-depo.html
and yes, you get headlight assembly and HID kit, put the HID kit into the new headlight assembly
http://www.carwear.com.au/Mercedes%2...C%20Class.html
These are depos with a additional HID kit plugged in, there is no need to rewiring anything. the KIT kit is plug and play and takes 2 mins to connect in.
The High beams stay normal halogen, i didn;t really see the point in having a Xenon high beam.
Here is a link to the DIY on how to install new headlights without taking the front bar off.
http://mymbonline.com/forum/uploads/...lights_505.pdf








