ebaymark

My wiring harness is missing the end connector, and just my luck, Mercedes has none to sell. I do have a connector that will fit the camera, but I don't dare wire it up until I know which pins get the power and which wires go to which pins, so I do not apply power to pins that cannot handle it. It is the 4-pin shielded night vision connector for the S-Class. My part number reads A2228201697. Does anyone know this pinout or which color wires mate to which pins? My intent is to keep everything stock and simply repair the missing connector end that makes my night vision features inoperative. Many thanks in advance! Photos of my situation are provided.

I have a connector that will fit this

I do not have the connector end of the harness that has been removed.

Diesel Benz

An old topic, probably no help needed any more but:

pin 1, blue
pin 2, orange
pin3, green
pin 3, brown.

Shield should be obvious.

ebaymark

Thanks so much for posting! To confirm the pin locations on my camera - is the detail below correct?

1 upper left on my photo of the male camera pins - Blue​​​​​​
​​​​​​​2 lower left on photo of male camera pins - Orange​​​​​​
3 upper right on photo of male camera pins - Green​​​​​​
4 lower right on photo of male camera pins - Brown​​​​​​

So I would wire to my camera pin positions as shown in the photo like this, correct....

Blue Green

Orange Brown