C117 Canbus-B Interfacing seats and controller
02-29-2024, 08:05 PM
#1
Newbie
Thread Starter
Join Date: Feb 2024
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
CLA200
C117 Canbus-B Interfacing seats and controller
Hi All,
I have a project (with no canbus) where im planning on using my spare C117 seats from my CLA200. The seat controls for these are on the door, I believe it's still using the same Canbus-B (interior).
Would it be possible to connect the 2 can bus wires on each device (door switch and seat) together to control movements, obviously need to get 12v to the seat and power the door switch also. If not what would new the best way to achieve an outcome to control the seats?
I can rewire the motors just with manual switches but I would like to retain the seat controllers as I believe they have limit switches etc.
Cheers
Ben
I have a project (with no canbus) where im planning on using my spare C117 seats from my CLA200. The seat controls for these are on the door, I believe it's still using the same Canbus-B (interior).
Would it be possible to connect the 2 can bus wires on each device (door switch and seat) together to control movements, obviously need to get 12v to the seat and power the door switch also. If not what would new the best way to achieve an outcome to control the seats?
I can rewire the motors just with manual switches but I would like to retain the seat controllers as I believe they have limit switches etc.
Cheers
Ben
