Aftermarket HID kit
Thread Starter
Newbie
Joined: Sep 2008
Posts: 3
Likes: 0
B-Class B200
Aftermarket HID kit
I am going to put HIDs on my low bulb and fog lights. I know that I need H7 and H11 convention kits but the dealership told me that the low bulb has sensor that might display message after installed the HID kit. So I just wander does anyone here has solution for that... Thank you
MBWorld Fanatic!
Joined: Nov 2001
Posts: 1,377
Likes: 1
From: Vancouver Island, B.C. Canada
2005 smart cabrio; 2008 Mercedes-Benz B 200
Does your car have the exterior sight and light package, which includes the bulb burnout indicator? If not, it should not be a problem.
If so, ask the HID vendor if they have 55W simulators (HIDs that burn an additinal 20W in a resistor) to simulate the load of a 55W incandescent bulb. If they do, it should not trouble a bulb-burnout indicator.
If so, ask the HID vendor if they have 55W simulators (HIDs that burn an additinal 20W in a resistor) to simulate the load of a 55W incandescent bulb. If they do, it should not trouble a bulb-burnout indicator.
Junior Member
Joined: Sep 2008
Posts: 21
Likes: 0
From: Woodinville Wa
Bagged w203 C320/ML430 on 22's
..H.I.Ds..
Most of the kits come with the ballast that put out and burn at 35 w from 55w which will not throw that code i would go with a EFX .. $175 H.I.D. kit plug and play lifetime warranty on ballast and bulbs 100% shock/dust/water proof check them out at www.euroefx.com
Last edited by LayLow; Sep 30, 2008 at 11:29 PM.
aftermarket, benz, buy, conversion, efx, euroefx, euroefxcom, forum, hid, hids, kit, lights, mercedes, smoked, tail, wwweuroefxcom
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
