Mercedes C350 M276 3.5
11-18-2019, 06:10 PM
#1
Newbie
Thread Starter
Mercedes C350 M276 3.5
Hi Guys,
Thought I would start this and start documenting everything I do on my c350 3.5.
Anyway...
- 3.5” Stainless steel exhuast straight pipe from the cats back with a H resonator.
- 19” Veeman wheels
So far that’s all worth mentioning really the few little bits here and there.
im looking into making a cold air intake if anyone has any ideas for the M276 n/a engine that would be great. Also any other ideas?
Also in the process of installing C63 Front Brakes - just awaiting a few more parts.
thanks for reading
Thought I would start this and start documenting everything I do on my c350 3.5.
Anyway...
- 3.5” Stainless steel exhuast straight pipe from the cats back with a H resonator.
- 19” Veeman wheels
So far that’s all worth mentioning really the few little bits here and there.
im looking into making a cold air intake if anyone has any ideas for the M276 n/a engine that would be great. Also any other ideas?
Also in the process of installing C63 Front Brakes - just awaiting a few more parts.
thanks for reading
05-02-2020, 03:17 AM
#2
Hi Guys,
Thought I would start this and start documenting everything I do on my c350 3.5.
Anyway...
- 3.5” Stainless steel exhuast straight pipe from the cats back with a H resonator.
- 19” Veeman wheels
So far that’s all worth mentioning really the few little bits here and there.
im looking into making a cold air intake if anyone has any ideas for the M276 n/a engine that would be great. Also any other ideas?
Also in the process of installing C63 Front Brakes - just awaiting a few more parts.
thanks for reading
Thought I would start this and start documenting everything I do on my c350 3.5.
Anyway...
- 3.5” Stainless steel exhuast straight pipe from the cats back with a H resonator.
- 19” Veeman wheels
So far that’s all worth mentioning really the few little bits here and there.
im looking into making a cold air intake if anyone has any ideas for the M276 n/a engine that would be great. Also any other ideas?
Also in the process of installing C63 Front Brakes - just awaiting a few more parts.
thanks for reading
05-10-2020, 11:18 AM
#3
MBWorld Fanatic!
The air intake for the C350 with the M276 is a straight shot from the outside air to the filter box. You can’t get any better then that. As far as the brakes, I have installed the C63 rear brake calipers with the 330 mm rotors, and will install the front C63 calipers and 360 mm rotors when I finish receiving the parts as well. I went with the P30 Performance Package red calipers (code U70).
