head Gasket leak
#2
Super Member
The following might give you and idea of what is involved for a 4 cylinder MB:
http://www.kokes.net/SLK_head_remove.htm
I don't know how relevant that will be to a 6 cylinder but it is an interesting read. There was a post on www.club202.com by a guy who chronicled working on his 6 cylinder head and all the pitfalls. You might want to do a search for that.
http://www.kokes.net/SLK_head_remove.htm
I don't know how relevant that will be to a 6 cylinder but it is an interesting read. There was a post on www.club202.com by a guy who chronicled working on his 6 cylinder head and all the pitfalls. You might want to do a search for that.
#3
MBWorld Fanatic!
Join Date: Apr 2003
Location: Boston
Posts: 4,781
Likes: 0
Received 3 Likes
on
3 Posts
'05 A4 1.8TQM6
The headgasket is a labor intensive job...the part is only about $200 or so but its about 8-10 hours of labor. You could try and tackle the job yourself if you're up for the challenge. Or try to find a independent shop to repair it for you and the labor costs should be significantly lower.