ventilation
Member
Joined: Mar 2006
Posts: 123
Likes: 0
From: Shotts,Scotland.
1995 c220 auto
Remove the radio and the liner shell, remove the 2 screws under the top edge of the radio aperture then pull the lower edge of the fascia panel outwards and unhook the top edge, leave the fascia panel hanging there but do not strain the wiring.
The centre vents are held by 2 screws at the bottom ;which is why you had to take off the fascia panel; and 2 clips at the top , remove the screws and prise the clips downwards, then pull the centre vents from the fascia.
George.
The centre vents are held by 2 screws at the bottom ;which is why you had to take off the fascia panel; and 2 clips at the top , remove the screws and prise the clips downwards, then pull the centre vents from the fascia.
George.
