ATTN DJpo
02-15-2002 | 12:43 PM
#1
Thread Starter
Almost a Member!
Joined: Jan 2002
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
ATTN DJpo
I have the H&R cupkits to what spacers did you use Because I used the 23mm spacers for the front and I rolled my fenders yet I'm still rubbing do you
have this problem I'm riding on 18X8 AMG with 40 series tires please help thx
have this problem I'm riding on 18X8 AMG with 40 series tires please help thx
02-15-2002 | 07:12 PM
#2
Senior Member
Joined: Nov 2001
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
From: Olympia, Washington
KLEEMANN C230K
Well, I don't have any spacers yet (other than what was in there) But I do plan on putting 9mm spacers up front and 13mm spacers in the rear when I get my fenders rolled.
I am running 225x40 18 in front, and 235x40 18 rear on 18x8.5 BRABUS MB IV w/ (i believe) 35mm offset, maybe 37mm. I only scrape when I turn sharp, or hit a big bump hard, but I haven't rolled the fenders yet, so.......
Good Luck,
John.
I am running 225x40 18 in front, and 235x40 18 rear on 18x8.5 BRABUS MB IV w/ (i believe) 35mm offset, maybe 37mm. I only scrape when I turn sharp, or hit a big bump hard, but I haven't rolled the fenders yet, so.......
Good Luck,
John.
