C-Class (W202) 1995-2000: C 200 CDI, C 220 CDI, C 270 CDI, C 180, C 200 K,C 230 K, C 220, C230, C 280

2000 C230 kompressor no start

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 12-09-2015 | 08:11 AM
  #1  
frobi's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2007
Posts: 46
Likes: 0
From: Waterloo, Ontario, Canada
2008 GL 320 CDI, 2000 E320, 2000 C230, 2004 Toyota Sienna
2000 C230 kompressor no start

My car stalled and checked and found out no fuel was coming to the engine bay. It started next day but only for few seconds. I replaced with new fuel pump and fuel filter today. Also replaced CPS. Still no start. Battery is fully charged and cranks normal. Any ideas ?

Last edited by frobi; 12-09-2015 at 08:15 AM.
Old 12-09-2015 | 12:02 PM
  #2  
Plutoe's Avatar
Out Of Control!!
Veteran: Army
 
Joined: Feb 2011
Posts: 14,804
Likes: 1,065
From: Shepardstown, WV
1999 E300TD
All I can suggest is to check spark and double check fuel pressure and do not forget to test the front SAM!!

Last edited by Plutoe; 12-09-2015 at 02:15 PM.
Old 12-09-2015 | 03:50 PM
  #3  
frobi's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2007
Posts: 46
Likes: 0
From: Waterloo, Ontario, Canada
2008 GL 320 CDI, 2000 E320, 2000 C230, 2004 Toyota Sienna
Originally Posted by Plutoe
All I can suggest is to check spark and double check fuel pressure and do not forget to test the front SAM!!
Thamks. Can not check furl pressure as no fuel is coming to the engine bay.
All fuses are fine. New fuel pump, fuel filter, fuel relay and CPS. There is no power coming to the fuel relay. When I apply power to the relay, car starts.
Is there another relay besides the one near the battery ?
It is electrical problem and can not figure out why there is no power to the fuel relay.
Old 12-09-2015 | 04:17 PM
  #4  
Plutoe's Avatar
Out Of Control!!
Veteran: Army
 
Joined: Feb 2011
Posts: 14,804
Likes: 1,065
From: Shepardstown, WV
1999 E300TD
I stand corrected however the with key on the K40 supplies voltage to the fuel pump relay
Old 12-10-2015 | 08:03 AM
  #5  
frobi's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2007
Posts: 46
Likes: 0
From: Waterloo, Ontario, Canada
2008 GL 320 CDI, 2000 E320, 2000 C230, 2004 Toyota Sienna
Originally Posted by Plutoe
I stand corrected however the with key on the K40 supplies voltage to the fuel pump relay
Thanks again. I will remove the K40 relay and check for burnt marks.
If any, I will solder it and see if it works.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: 2000 C230 kompressor no start



All times are GMT -4. The time now is 07:30 AM.