1999 MB c280 oil leak from oil filter housing.
#1
Junior Member
Thread Starter
Join Date: Jan 2020
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
C202
1999 MB c280 oil leak from oil filter housing.
I went to the local auto parts store. Told them my issue and the rubber seals they sold me are not for the oil filter housing I have.
I have the v6. The oil filter housing I have doesn’t have the 46mm nut inside of it. It looks like all one part. I would like to know how to
remove it and what seal needs to be replaced? Thank you
I have the v6. The oil filter housing I have doesn’t have the 46mm nut inside of it. It looks like all one part. I would like to know how to
remove it and what seal needs to be replaced? Thank you
Last edited by Br@dy1; 03-15-2020 at 06:06 PM. Reason: Adding pics
#2
MBWorld Fanatic!
Br@dy1,
Your photos dont show any leaks. Where is it leaking?
FYI- The black cap is the oil filter cover. You need to use an oil cap wrench
to remove it.
The seal (o-rings are inside) once the cap is unscrewed and oil filter is removed.
Here is some more reading for you.
Your photos dont show any leaks. Where is it leaking?
FYI- The black cap is the oil filter cover. You need to use an oil cap wrench
to remove it.
The seal (o-rings are inside) once the cap is unscrewed and oil filter is removed.
Here is some more reading for you.
#4
Junior Member
Thread Starter
Join Date: Jan 2020
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
C202
I clean the square timing chain seal. I replaced the rubber gasket inside of it and cleaned around it. I changed the oil today as well. I’ll see if it keeps leaking and get back with you.
i see a lot about taking the oil filter housing out and replacing the seals in it. My oil filter housing doesn’t have a 46mm bolt inside to loosen it. How would I take it out and what seals do I need to replace in it? Thank you.
i see a lot about taking the oil filter housing out and replacing the seals in it. My oil filter housing doesn’t have a 46mm bolt inside to loosen it. How would I take it out and what seals do I need to replace in it? Thank you.
#5
Hmmm my radiator reservoir was looking 2L a day. Mechanic said it was a coolant pipe around the oil filiter housing area. Pipe is only $150 AUD but labour would be $1350 AUD or $1000 US, is this fair?
W166 ML250
Branded mechanic, not euro.
W166 ML250
Branded mechanic, not euro.