Window Problem?
#1
Super Member
Thread Starter
Window Problem?
Sometimes, when either i am rolling the windows down or up... It goes half way up or down or something like that? Now is that a feature to only open half way? if so how do i do it on purpose... or is it an error? thanks
#2
Originally Posted by rrpnow
Sometimes, when either i am rolling the windows down or up... It goes half way up or down or something like that? Now is that a feature to only open half way? if so how do i do it on purpose... or is it an error? thanks
#3
MBWorld Fanatic!
Originally Posted by rrpnow
rolling the windows down or up
![Roll Eyes (Sarcastic)](https://mbworld.org/forums/images/smilies/rolleyes.gif)
#5
Super Member
Thread Starter
Originally Posted by mleskovar
Do you stop turning the crank too soon
Try synching your windows. Take each window to upper limit by pulling and holding button up then keep holding it for at least a second after it stops.
![Roll Eyes (Sarcastic)](https://mbworld.org/forums/images/smilies/rolleyes.gif)
#6
MBWorld Fanatic!
The way it's described in the owners manual is to pull on the button and keep holding it for 1 second more after it stops at the top/fully closed.
#7
MBWorld Fanatic!
Join Date: Oct 2002
Location: San Diego, Ca
Posts: 7,737
Likes: 0
Received 1 Like
on
1 Post
2003 Citron Green C230KMT
pinch protection. you have to have it on windows with auto up feature so you dont kill someone. ![Confused](https://mbworld.org/forums/images/smilies/confused.gif)
if the window is dragging, sticking or something on the way up, the pinch protection feature will tell it to go down. also this happens to me if i go over a speed bump or into a drive way too fast while the windows are on they way up using the one touch up.
![Confused](https://mbworld.org/forums/images/smilies/confused.gif)
if the window is dragging, sticking or something on the way up, the pinch protection feature will tell it to go down. also this happens to me if i go over a speed bump or into a drive way too fast while the windows are on they way up using the one touch up.
Trending Topics
#12
MBWorld Fanatic!
What?
Originally Posted by valdes
It is the sensor for the auto up it is only a couple of bucks but labour is what is expensive it is about an hour or so
#14
MBWorld Fanatic!
Join Date: Feb 2005
Location: Connecticut
Posts: 3,543
Likes: 0
Received 2 Likes
on
2 Posts
excites your girlfriend
Originally Posted by tyro
I'm getting this problem with my sun roof. One touch close stops about halfway and then re-opens.