New grill
thanks,
Eric
thanks,
Eric
Easy. 6 bolts. 4 on top/back portion of grille 2 on bottom/back portion of grille. Use a socket wrench (can't remember what size, but if you can't figure that out by trial and error, then you really shouldn't be doing DIY's). Take off all 6 bolts.
Once those are off, position the new grille in the same place. Make sure that the hood latch goes in the proper slat. Reverse the process with the screws (common knowledge when re-tightening is cross pattern).
That's it. That Simple.


