Pin-Outs of Power Folding Mirrors for the scoupe...
#1
Pin-Outs of Power Folding Mirrors for the scoupe...
Hey guys... i bought a pair of Power Folding mirrors... my scoupe does not have the memory seats...
so that means that i would need a new SAM and two new modules for each door... and a new headlight switch, right?
But... i'm not interested on spending all that money... so i'm thinking on hardwiring the power folding option...anyone has the pinouts?
thanks in advance...
so that means that i would need a new SAM and two new modules for each door... and a new headlight switch, right?
But... i'm not interested on spending all that money... so i'm thinking on hardwiring the power folding option...anyone has the pinouts?
thanks in advance...
#2
a picture:
![](http://flave.no.sapo.pt/DSC06686.jpg)
correct me if i'm wrong but...
in the picture the white connector (green/yellow wires) do the power folding...
and the black connector (with seven wires...) do the mirror regulation... plus the heating... correct?
![](http://flave.no.sapo.pt/DSC06686.jpg)
correct me if i'm wrong but...
in the picture the white connector (green/yellow wires) do the power folding...
and the black connector (with seven wires...) do the mirror regulation... plus the heating... correct?
#4
MBWorld Fanatic!
Join Date: May 2003
Location: Houston, TX
Posts: 4,002
Likes: 0
Received 96 Likes
on
52 Posts
2015 E250D
you will not be able to use the OEM switch then. The OEM switch communicated via CANBUS to the door controllers. You cannot hardwire this part. Then from each door controller, 2 wires go to each mirror for the folding. Reverse polarity for unfolding. The door controllers are not too bad. I think about 90-100 dollars each. Sam modules DO NOT need replacing.